manualshive.com logo in svg

Yamaha M7CL StageMix V1.5, Руководство пользователя

"Скачайте бесплатно дополнительное руководство Yamaha M7CL StageMix V1.5 на нашем сайте. Эта дополнительная инструкция поможет вам максимально эффективно использовать ваш микшер для шоу и концертов. Посетите manualshive.com, чтобы скачать полное руководство и получить все необходимые советы для работы с продуктом."

Поделиться
Скачать
background image

 

M7CL  Owner’s Manual

 

Operations in the SELECTED CHANNEL section

 

92

 

●

 

Adjusting the send level to a MIX bus or 
MATRIX bus

 

Use the TO MIX/TO MATRIX field when you want to 
send the signal from an INPUT/ST IN channel to a MIX 
bus, or from an INPUT, ST IN, MIX, or STEREO channel 
to a MATRIX bus.

 

1

 

TO MIX/TO MATRIX buttons
(Input channels only)

 

These buttons select the buses that will be controlled. 
This field will show the MIX buses if the TO MIX but-
ton is on, or the MATRIX buses if the TO MATRIX 
button is on.

 

B

 

TO MIX/TO MATRIX SEND LEVEL knobs

 

These knobs indicate the send level of the signal sent 
from that input channel to each MIX bus or MATRIX 
bus. To adjust the values, use the corresponding [MIX/
MATRIX] encoder of the SELECTED CHANNEL 
section.

If the send-destination MIX bus / MATRIX bus is set 
to stereo, the left knob of the two adjacent knobs will 
operate as a PAN knob. (For a ST IN channel, a stereo 
MIX channel, or STEREO channel, it will operate as 
the BALANCE knob.) When you press this knob, the 
corresponding MIX/MATRIX SEND popup window 
will appear.

 

C

 

TO MIX/TO MATRIX SEND ON/OFF but-
ton

 

These are on/off switches for the signal sent from the 
channel to each MIX bus / MATRIX bus.

To adjust the send level to MIX buses or MATRIX buses, 
first use the TO MIX / TO MATRIX buttons to select the 
buses to which you want to send the signal (only for input 
channels).

Next, use the corresponding [MIX/MATRIX] encoders of 
the SELECTED CHANNEL section (color-coded in the 
screen) to adjust the send levels of the signal sent to each 
bus.
If desired, you can use the TO MIX/TO MATRIX SEND 
ON/OFF buttons to switch the signal sent to each bus on/
off. Above each of these buttons is shown the position 
from which the signal is sent from the current channel. 
(For details on changing the send position 

 

→

 

 p. 70).

 

●

 

Adjusting the send level from the MIX 
channels to a specific MATRIX bus

 

To adjust the send level from the MIX channels to a spe-
cific MATRIX bus, first select the send-destination 
MATRIX channel, and then access the SELECTED 
CHANNEL VIEW screen. If you have selected a 
MATRIX channel, the FROM MIX field is shown at the 
left edge of the SELECTED CHANNEL VIEW screen. 
This field includes the following items.

 

1

 

FROM MIX SEND LEVEL knobs

 

These adjust the send level of the signal sent from 
each MIX channel to the selected MATRIX bus.

 

B

 

FROM MIX SEND ON/OFF buttons

 

These are on/off switches for the signal sent from each 
MIX channel to the MATRIX bus.

To adjust the send level from a MIX bus, turn the corre-
sponding [MIX/MATRIX] encoder in the SELECTED 
CHANNEL section (they are color-coded as in the 
screen).
If desired, you can use the FROM MIX SEND ON/OFF 
buttons to switch the signal sent from each MIX channel 
to the MATRIX bus on/off. Above each of these buttons is 
shown the position from which the signal is sent from the 
MIX channel. (For details on changing the send position 

 

→

 

 p. 87).

Subsequent operations will differ depending on the 
parameters you want to adjust.

3

1

2

• If the send-destination MIX bus is a FIXED type, this knob will 

not appear; only the TO MIX SEND ON/OFF button ( 

3

) will 

be shown.

NOTE

2

1

Содержание M7CL StageMix V1.5

























































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для M7CL StageMix V1.5

Mackie PPM1008 Mode D'Emploi preview
PPM1008
Бренд: Mackie Страницы: 32
VOX electronics MX-3005 Operating Instructions Manual preview
MX-3005
Бренд: VOX electronics Страницы: 67
Radio Shack 32-2057 Quick Start Manual preview
32-2057
Бренд: Radio Shack Страницы: 2
NOVIK NVK-800P USB Instruction Manual preview
NVK-800P USB
Бренд: NOVIK Страницы: 18
inventum mini-blender NB121 Instruction Manual preview
mini-blender NB121
Бренд: inventum Страницы: 28
Fenton 172.573 Instruction Manual preview
172.573
Бренд: Fenton Страницы: 28
Pathway connectivity solutions Cognito 2 User Manual preview
Cognito 2
Бренд: Pathway connectivity solutions Страницы: 165
Beyerdynamic MA 206 Operating Instructions Manual preview
MA 206
Бренд: Beyerdynamic Страницы: 44
Black & Decker MX410B Use And Care Manual preview
MX410B
Бренд: Black & Decker Страницы: 2
Black & Decker PERFORMANCE HELIX MX610 Series Use And Care Manual preview
PERFORMANCE HELIX MX610 Series
Бренд: Black & Decker Страницы: 2
Black & Decker Perormance Helix MX610B Use And Care Manual preview
Perormance Helix MX610B
Бренд: Black & Decker Страницы: 2
Black & Decker PowerPro MX78WS Use And Care Book preview
PowerPro MX78WS
Бренд: Black & Decker Страницы: 2
Black & Decker X401B Quick Start Manual preview
X401B
Бренд: Black & Decker Страницы: 2
Black & Decker PERFORMANCE MX600 Series Use And Care Manual preview
PERFORMANCE MX600 Series
Бренд: Black & Decker Страницы: 2
Black & Decker MGD200 Use And Care Book Manual preview
MGD200
Бренд: Black & Decker Страницы: 8
Koch Guitar Electronics TWINTONE Mark III Operating Instructions Manual preview
TWINTONE Mark III
Бренд: Koch Guitar Electronics Страницы: 13
Denon DN-X1100 - DJ Mixer Owner'S Manual preview
DN-X1100 - DJ Mixer
Бренд: Denon Страницы: 14
Rane SM 82 Operator'S Manual preview
SM 82
Бренд: Rane Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды