manualshive.com logo in svg

Yamaha M7CL StageMix V1.5, Руководство пользователя

"Скачайте бесплатно дополнительное руководство Yamaha M7CL StageMix V1.5 на нашем сайте. Эта дополнительная инструкция поможет вам максимально эффективно использовать ваш микшер для шоу и концертов. Посетите manualshive.com, чтобы скачать полное руководство и получить все необходимые советы для работы с продуктом."

Поделиться
Скачать
background image

 

M7CL  Owner’s Manual

 

Using the Monitor function

 

156

 

If you’ve selected DEFINE in the SOURCE SELECT 
field, you can use the ASSIGN field to select multiple 
sources. The following table shows the monitor 
sources you can select in the ASSIGN field.

 

5

 

To specify a port as the output destination 
for monitor signals L, C, R, press one of the 
output select buttons (L/R/C) in the meter 
field to open the OUTPUT PORT SELECT 
popup window, and choose from the follow-
ing monitor signal output destinations 
(multiple selections are allowed).

 

• M7CL-32/48

• M7CL-48ES

 

When you’ve selected an output port, press the 
CLOSE button to close the popup window.

In the same way, specify the output ports for MONI-
TOR OUT L, R, and C.

 

6

 

To enable monitoring, press the OUTPUT 
button to turn it on.

 

The monitor source you selected in step 4 will be sent 
to the output destination you specified in step 5.

 

7

 

To adjust the monitor fader by using the 
STREO MASTER fader/MONO MASTER 
fader, press the FADER ASSIGN MODE but-
ton to select STERO or MONO.

 

When STEREO is selected, you can use the SETERO 
MASTER fader on the top panel to adjust the monitor 
fader. When MONO is selected, you can use the 
MONO MASTER fader on the top panel to adjust the 
monitor fader.

Depending on the FADER ASSIGN MODE setting, 
the MONITOR button in the function access area turns 
red when STEREO is selected, and the button turns 
yellow when MONO is selected.

 

8

 

Adjust the monitor fader using the STEREO 
MASTER fader/MONO MASTER fader, or the 
MONITOR FADER knob on the screen.

 

9

 

To adjust the monitor level, use the MONI-
TOR LEVEL knob located in the SCENE 
MEMORY/MONITOR section of the top 
panel.

 

If PHONES LEVEL LINK is ON, use the MONITOR 
LEVEL knob and the monitor fader, as well as the 
PHONES LEVEL knob to adjust the monitor level 
when monitoring through headphones.

 

10

 

Make settings for Dimmer, Delay, and Mon-
aural as desired.

 

MIX 1–16 buttons

 

Output signals of MIX channels 1–16

 

MTRX 1–8 buttons

 

Output signals of MATRIX channels 
1–8

 

STEREO L/R button

 

STEREO L/R channel output signal

 

MONO (C) button

 

MONO channel output signal

 

ST IN 1–4 buttons 
(M7CL-32/48)

 

ST IN jacks 1–4 input signals

 

OMNI 1–2 – 7–8 buttons 
(M7CL-48ES)

 

OMNI IN jacks 1–8 input signals

 

OMNI 1–16

 

OMNI OUT jacks 1–16

 

2TR OUT L, R

 

2TR OUT DIGITAL jack L, R

 

SLOT 1–3

 

Output channels 1–16 of an I/O card 
installed in slots 1–3

 

ES 1–24

 

EtherSound output channels 1–24

 

2TR OUT L, R

2TR OUT DIGITAL jack L, R

OMNI 1–8

OMNI OUT jacks 1–8

SLOT 1–3

Output channels 1–16 of an I/O card 
installed in slots 1–3

• You can select a maximum of eight monitor sources in the 

ASSIGN field. If you select eight monitor sources, no further 
selections will be possible. Please turn off the buttons for 
unneeded sources.

NOTE

• If desired, you can specify output ports only for MONITOR 

OUT L and R, and monitor through two speakers. 

• If you have not specified an output port for MONITOR OUT C, 

selecting the MONO (C) button or LCR button as the monitor 
source will automatically cause the MONO channel signal to 
be distributed to MONITOR OUT L/R.

HINT

• The PHONES OUT jack will always output the monitor signal, 

regardless of whether the OUTPUT button is on or off.

HINT

• The monitor fader and the MONITOR LEVEL knob are placed 

in serial. The MONITOR LEVEL knob on the top panel 
remains effective while you are using this function to change 
the monitor level. If the MONITOR LEVEL knob is set to mini-
mum, no monitor signal will be output.

NOTE

• The [ON] keys for the STEREO or MONO channels and the 

OUTPUT buttons on the MONITOR screen are linked. The 
PHONES OUT jack will always output the monitor signal, 
regardless of whether the OUTPUT button is on or off.

NOTE

• Monitor on/off operations, selection of the monitor source, 

and dimmer on/off operations can also be assigned to user-
defined keys (

→

 p. 216).

HINT

Содержание M7CL StageMix V1.5

























































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для M7CL StageMix V1.5

pyrex SB-510 GOLD Manual preview
SB-510 GOLD
Бренд: pyrex Страницы: 20
Klarstein 10030085 Manual preview
10030085
Бренд: Klarstein Страницы: 31
Karel DSS80 Owner'S Manual preview
DSS80
Бренд: Karel Страницы: 19
VOX electronics 8606019600396 Operating Instructions Manual preview
8606019600396
Бренд: VOX electronics Страницы: 79
Xaoc Devices SAMARA 1962 UTILITY WAVEFORM PROCESSOR II Operator'S Manual preview
SAMARA 1962 UTILITY WAVEFORM PROCESSOR II
Бренд: Xaoc Devices Страницы: 8
Mackie 1402-VLZ PRO Service Manual preview
1402-VLZ PRO
Бренд: Mackie Страницы: 12
Samson MIXPAD MXP144 Owner'S Manual preview
MIXPAD MXP144
Бренд: Samson Страницы: 24
Russell Hobbs RHHM16 Owner'S Manual preview
RHHM16
Бренд: Russell Hobbs Страницы: 8
Koch Guitar Electronics TWINTONE Mark III Operating Instructions Manual preview
TWINTONE Mark III
Бренд: Koch Guitar Electronics Страницы: 13
Phoenix MELANGE 5L Operating And Service Manual preview
MELANGE 5L
Бренд: Phoenix Страницы: 20
Taurus 913515000 Manual preview
913515000
Бренд: Taurus Страницы: 56
VADDIO EasyUSB Mixer/Amp Release Notes & Update Instructions preview
EasyUSB Mixer/Amp
Бренд: VADDIO Страницы: 7
Peloton PLTN-RB1VO User Manual preview
PLTN-RB1VO
Бренд: Peloton Страницы: 14
Enodis J Operation Manual preview
J
Бренд: Enodis Страницы: 36
Trisa 6617.70 Instructions For Use Manual preview
6617.70
Бренд: Trisa Страницы: 80
Sparky Group BM 1380CEPlus Original Instructions Manual preview
BM 1380CEPlus
Бренд: Sparky Group Страницы: 90
Sparky Group BM 1060CEPlus Original Instructions Manual preview
BM 1060CEPlus
Бренд: Sparky Group Страницы: 90
Menuett 802-701 Operating Instructions Manual preview
802-701
Бренд: Menuett Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды