Yamaha F150C Скачать руководство пользователя | Manualshive

Страница: 20 / 80

background image

Basic components

14

NOTE:

The neutral throttle lever will operate only
when the remote control lever is in neutral.
The remote control lever will operate only
when the neutral throttle lever is in the closed
position.

EMU26230

Free accelerator

To open the throttle without shifting into either
forward or reverse, push the free accelerator
button and move the remote control lever.

NOTE:

●

The free accelerator button can only be
used when the remote control lever is in the
neutral position.

●

After the button is pushed, the throttle be-
gins to open after the remote control lever is
moved at least 35°.

●

After using the free accelerator, return the
remote control lever to the neutral position.
The free accelerator button will return auto-
matically to its set position. The remote con-
trol will then engage forward and reverse
normally.

EMU25970

Throttle friction adjuster

A friction device provides adjustable resis-
tance to movement of the throttle grip or the
remote control lever, and can be set accord-
ing to operator preference.
To increase resistance, turn the adjuster
clockwise. To decrease resistance, turn the
adjuster counterclockwise.

WARNING

EWM00030

Do not overtighten the friction adjuster. If
there is too much resistance, it could be
difficult to move throttle lever or grip,
which could result in an accident.

1. Fully open

2. Fully closed

1. Fully open
2. Fully closed

3. Free accelerator

63P10.book Page 14 Tuesday, May 13, 2003 10:23 AM

«
...
18
19
20
21
22
...
»

Содержание F150C

















































































Отзывы:

Нет отзывов

Похожие инструкции для F150C

Бренд: Meccanica Fadini Страницы: 4

Бренд: AOpen Страницы: 8

Бренд: NXP Semiconductors Страницы: 14

Бренд: Microsemi Страницы: 15

Бренд: Tews Technologies Страницы: 26

tps61040EVM-002

Бренд: Texas Instruments Страницы: 31

Бренд: Microchip Technology Страницы: 44

Бренд: WynMax Страницы: 68

Бренд: IEI Technology Страницы: 156

Бренд: Acrosser Technology Страницы: 3

Бренд: Supermicro Страницы: 97

Бренд: Gigabyte Страницы: 96

Бренд: SOYO Страницы: 99

TLV320AIC12KEVM-K

Бренд: Texas Instruments Страницы: 40

Бренд: Yamaha Страницы: 82

Бренд: AOpen Страницы: 8

Бренд: MiTAC Страницы: 132

Бренд: Lantronix Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды