manualshive.com logo in svg

Yamaha F-20B, Руководство пользователя

Поделиться
Скачать
Yamaha F-20B Скачать руководство пользователя страница 92

INDEX

85

K

Key number ............................................ 4

L

Laws and regulations.............................. 3
Low oil pressure alert............................ 27
Low oil pressure-alert indicator............. 26
Lubrication ............................................ 58

M

Main switch ........................................... 21
Maintenance chart 1 ............................. 61
Maintenance chart 2 ............................. 63
Manual starter handle ........................... 21
Modifications........................................... 2
Motor disposal requirements ................ 15
Mounting height .................................... 30
Mounting motor..................................... 12
Mounting the outboard motor................ 29
Muddy or acidic water........................... 14

N

Neutral interlock trigger......................... 18
Neutral throttle lever ............................. 18

O

Operating engine .................................. 37
Outboard motor (painted surface), 

checking ............................................. 59

Outboard motor safety ............................ 1
Outboard motor serial number................ 4
Overheat alert ....................................... 27
Overheat-alert indicator ........................ 26
Overloading ............................................ 2

P

Passengers............................................. 2
Passenger training.................................. 3
People in the water ................................. 2
Periodic maintenance ........................... 59
Personal flotation devices (PFDs) .......... 2
Power tilt ................................................. 1
Power tilt switch .................................... 21
Power tilt system, checking .................. 36

Power tilt unit ........................................ 24
Power tilt will not operate...................... 79
Propeller ................................................. 1
Propeller, checking ............................... 69
Propeller, installing ............................... 70
Propeller, removing............................... 70
Propeller selection ................................ 13

R

Read manuals and labels ....................... 6
Rectifier Regulator (optional) ................ 12
Remote control box............................... 17
Remote control lever............................. 18
Remote control requirements ............... 12
Replacement parts................................ 59
Rotating parts ......................................... 1

S

Sending fuel (portable tank).................. 37
Severe operating conditions ................. 60
Shallow water ....................................... 52
Shifting.................................................. 44
Shifting (checks after engine warm 

up) ...................................................... 44

Spark plug, cleaning and adjusting....... 65
Specifications.......................................... 9
Starter button ........................................ 21
Starter will not operate.......................... 79
Start-in-gear protection ......................... 13
Starting engine...................................... 38
Steering friction adjuster ....................... 22
Stopping boat........................................ 45
Stopping engine.................................... 46
Stop switches........................................ 44
Storing outboard motor ......................... 56
Submerged outboard motor.................. 83

T

Throttle friction adjuster ........................ 19
Throttle grip........................................... 19
Throttle indicator ................................... 19
Tiller handle .......................................... 18
Tilting up and down............................... 49
Tilt lock mechanism .............................. 23

6AG-9-79-1E0.book  85 ページ  ２０１４年１１月１０日　月曜日　午後４時８分

Содержание F-20B































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды