Yamaha F-20B Скачать руководство пользователя | Manualshive

Страница: 20 / 94

background image

Specifications and requirements

13

that do not have a rectifier or Rectifier
Regulator.

If you wish to use a battery with the models
without a rectifier or Rectifier Regulator, in-
stall an optional Rectifier Regulator.
Install an optional Rectifier Regulator or use
accessories rated to withstand 18 volts or
higher with the above models. Consult your
Yamaha dealer for details on installing an
optional Rectifier Regulator.

EMU34196

Propeller selection

Next to selecting an outboard motor, select-
ing the right propeller is one of the most im-
portant purchasing decisions a boater can
make. The type, size, and design of your pro-
peller have a direct impact on acceleration,
top speed, fuel economy, and even engine
life. Yamaha designs and manufactures pro-
pellers for every Yamaha outboard motor
and every application.
Your outboard motor came with a Yamaha
propeller selected to perform well over a
range of applications, but there may be uses
where a different propeller would be more
appropriate.
Your Yamaha dealer can help you select the
right propeller for your boating needs. Select
a propeller that will allow the engine to reach
the middle or upper half of the operating
range at full throttle with the maximum boat-
load. Generally, select a larger pitch propel-
ler for a smaller operating load and a smaller
pitch propeller for a heavier load. If you carry
loads that vary widely, select the propeller
that lets the engine run in the proper range
for your maximum load but remember that
you may need to reduce your throttle setting
to stay within the recommended engine
speed range when carrying lighter loads.
To check the propeller, see page 69.

EMU25771

Start-in-gear protection

Yamaha outboard motors or Yamaha-ap-
proved remote control units are equipped
with start-in-gear protection device(s). This
feature permits the engine to be started only
when it is in neutral. Always select neutral
before starting the engine.

EMU41953

Engine oil requirements

Select an oil grade according to the average
temperatures in the area where the outboard
motor will be used.

1. Propeller diameter in inches
2. Propeller pitch in inches
3. Type of propeller (propeller mark)

Recommended engine oil:

YAMALUBE 4 or 4-stroke outboard

motor oil

Recommended engine oil grade 1:

SAE 10W-30/10W-40/5W-30

API SE/SF/SG/SH/SJ/SL

Recommended engine oil grade 2:

SAE 15W-40/20W-40/20W-50

API SH/SJ/SL

Engine oil quantity (without oil filter

replacement):

1.6 L (1.69 US qt, 1.41 Imp.qt)

Engine oil quantity (with oil filter re-

placement):

1.8 L (1.90 US qt, 1.58 Imp.qt)

ZMU04605

-

x

1

2 3

6AG-9-79-1E0.book 13 ページ２０１４年１１月１０日　月曜日　午後４時８分

«
...
18
19
20
21
22
...
»

Содержание F-20B































































































Отзывы:

Нет отзывов

Похожие инструкции для F-20B

Бренд: Jensen Страницы: 12

Бренд: Tiger Electronics Страницы: 8

Бренд: SMSL Страницы: 28

Бренд: RAM Страницы: 13

Бренд: Teac Страницы: 60

Бренд: DUB Edition Страницы: 18

NAC 112 - ISSUE 2

Бренд: NAIM Страницы: 30

Бренд: Absolute Measurement Страницы: 10

Бренд: Pro Co Sound Страницы: 34

Richer Bass RB1

Бренд: Laney Страницы: 12

Бренд: Ibanez Страницы: 20

Бренд: Magnum Страницы: 17

Бренд: Harman Kardon Страницы: 20

Бренд: McHammer Страницы: 3

Бренд: FONESTAR Страницы: 9

Бренд: Kustom Страницы: 4

Бренд: PKN Controls Страницы: 9

Бренд: Kustom Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды