manualshive.com logo in svg

Yamaha F-20B, Руководство пользователя

Поделиться
Скачать
Yamaha F-20B Скачать руководство пользователя страница 66

Maintenance

59

will leak out of the connector instead
of cooling the engine, which can
cause serious overheating. Be sure
the connector is tightened securely
on the fitting after flushing the en-
gine.

 [ECM00542]

TIP:

When flushing the engine with the boat in
the water, tilting up the outboard motor un-
til it is completely out of the water will
achieve better results.

For cooling system flushing instructions,
see page 55.

EMU44342

Cleaning the outboard motor

When cleaning the outboard motor, the top
cowling must be installed.
1. Wash the exterior of the outboard motor

using fresh water. 

NOTICE:

 Do not

spray water into the air intake.

 [ECM01841]

 

2. Drain the cooling water completely out of

the outboard motor. Clean the body thor-
oughly.

EMU28462

Checking painted surface of 
outboard motor

Check the outboard motor for scratches,
nicks, or flaking paint. Areas with damaged
paint are more likely to corrode. If necessary,

clean and paint the areas. A touch-up paint is
available from your Yamaha dealer.

EMU37004

Periodic maintenance

WARNING

EWM01943

These procedures require mechanical
skills, tools, and supplies. If you do not
have the proper skills, tools, or supplies
to perform a maintenance procedure,
have a Yamaha dealer or other qualified
mechanic do the work.
The procedures involve disassembling
the motor and exposing dangerous parts.
To reduce the risk of injury from moving,
hot, or electrical parts:

Turn off the engine and keep the key(s)
and engine shut-off cord (lanyard) with
you when you perform maintenance un-
less otherwise specified.

The power tilt switch operate even
when the ignition key is off. Keep peo-
ple away from the switches whenever
working around the motor. When the
motor is tilted, keep away from the area
under it or between it and the clamp
bracket. Be sure no one is in this area
before operating the power tilt mecha-
nism.

Allow the engine to cool before han-
dling hot parts or fluids.

Always completely reassemble the mo-
tor before operation.

EMU28512

Replacement parts

If replacement parts are necessary, use only
genuine Yamaha parts or parts of equivalent
design and quality. Any part of inferior quality
may malfunction, and the resulting loss of
control could endanger the operator and
passengers. Yamaha genuine parts and ac-

1. Air intake

1

ZMU07873

6AG-9-79-1E0.book  59 ページ  ２０１４年１１月１０日　月曜日　午後４時８分

Содержание F-20B































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды