manualshive.com logo in svg

Yamaha F-20B, Руководство пользователя

Поделиться
Скачать
Yamaha F-20B Скачать руководство пользователя страница 76

Maintenance

69

13. Start the engine and make sure that the

low oil pressure-alert indicator remains
off. Also, make sure that there are no oil
leaks. 

NOTICE:

 If the low oil pressure-

alert indicator comes on or if there
are oil leaks, stop the engine and find
the cause. Continued operation with
a problem could cause severe engine
damage. Consult your Yamaha dealer
if the problem cannot be located and
corrected.

 [ECM01623]

14. Install the top cowling.
15. Dispose of used oil according to local

regulations.

TIP:

For more information on the disposal of
used oil, consult your Yamaha dealer.

Change the oil more often when operating
the engine under adverse conditions such
as extended trolling.

EMU29116

Inspecting wiring and connectors

Inspect that each connector is engaged
securely.

Inspect that each ground lead is properly
secured.

 

EMU32113

Checking propeller

WARNING

EWM01882

You could be seriously injured if the en-
gine accidentally starts when you are
near the propeller. Before inspecting, re-
moving, or installing the propeller, place
the shift control in neutral, turn the main
switch to “

” (off) and remove the key,

and remove the clip from the engine shut-
off switch. Turn off the battery cut-off
switch if your boat has one.

Do not use your hand to hold the propeller
when loosening or tightening the propeller
nut. Put a wood block between the anti-cavi-
tation plate and the propeller to prevent the
propeller from turning.

Checkpoints

Check each of the propeller blades for ero-

1. Lower mark
2. Oil dipstick
3. Upper mark

2

1

3

 ZMU0

8

041

ZMU02087

ZMU01897

6AG-9-79-1E0.book  69 ページ  ２０１４年１１月１０日　月曜日　午後４時８分

Содержание F-20B































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды