Yamaha 2003 YZ450F, Руководство по эксплуатации для владельца

Страница: 526 / 644

5 - 43
CHAS
HANDLEBAR
8. Install:
●
Master cylinder 1
●
Master cylinder bracket 2
●
Bolt (master cylinder bracket) 3
NOTE:
●
Install the bracket so that the arrow mark
a
faces upward.
●
First tighten the bolt on the upper side of the
master cylinder bracket, and then tighten the
bolt on the lower side.
9. Install:
●
“ENGINE STOP” button 1
●
Clutch lever holder 2
●
Bolt (clutch lever holder) 3
●
Hot starter lever holder 4
●
Bolt (hot starter lever holder) 5
●
Clamp 6
NOTE:
●
The “ENGINE STOP” button, clutch lever
holder and clamp should be installed accord-
ing to the dimensions shown.
●
Pass the “ENGINE STOP” button lead in the
middle of the clutch lever holder.
T
R
.
.
9 Nm (0.9 m · kg, 6.5 ft · lb)
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
10. Install:
●
Clutch cable
1
●
Hot starter cable
2
NOTE:
Apply the lithium soap base grease on the
clutch cable end and hot starter cable end.
11. Adjust:
●
Clutch lever free play
Refer to “CLUTCH ADJUSTMENT”
section in the CHAPTER 3.
●
Hot starter lever free play
Refer to “HOT STARTER LEVER
ADJUSTMENT” section in the CHAP-
TER 3.