Yamaha 2003 YZ450F, Руководство по эксплуатации для владельца

Страница: 290 / 644

4 - 23
ENG
CAMSHAFTS
REMOVAL POINTS
Camshaft
1. Remove:
●
Timing plug 1
●
Straight plug 2
2. Align:
●
“I” mark
With stationary pointer.
Checking steps:
●
Turn the crankshaft counterclockwise with
a wrench.
●
Align the “I” mark
a
on the rotor with the
stationary pointer
b
on the crankcase
cover. When the “I” mark is aligned with
the stationary pointer, the piston is at the
Top Dead Center (T.D.C.).
NOTE:
●
In order to be sure that the piston is at Top
Dead Center, the punch mark
c
on the
exhaust camshaft and the punch mark
d
on the intake camshaft must align with the
cylinder head surface, as shown in the
illustration.
●
If there is no clearance, rotate the crank-
shaft counterclockwise one turn.
3. Loosen:
●
Tensioner cap bolt
1
4. Remove:
●
Timing chain tensioner
2
5. Remove:
●
Bolt (camshaft cap) 1
●
Camshaft caps 2
NOTE:
Remove the bolts (camshaft cap) in a criss-
cross pattern, working from the outside in.
CAUTION:
The bolts (camshaft cap) must be removed
evenly to prevent damage to the cylinder
head, camshafts or camshaft caps.
1
2
1
2