114
Functions Used
As Needed
Set Mode
4
Turn
O
to select [3 AUDIO].
5
Press
H
.
6
Turn
O
to select [1 MIC GAIN].
7
Press
H
.
8
Turn
O
to select a microphone sensitivity level.
Select a microphone gain level from the following:
LEVEL 1 (Lowest sensitivity) to LEVEL 9 (Highest
sensitivity)
Remark
Default: LEVEL 5
9
Press
M
twice.
The selected microphone gain level is set.
10
Press
p
to exit the Set mode.
Tips
• Increasing the microphone gain excessively can distort the sound or pick up the surrounding noise,
impairing intelligibility.
• Be sure to adjust the microphone gain whenever you change microphones.
Muting Voice
In the dual reception mode, the audio being received on the non-operating band is
muted when a signal is herd on the operating band.
For more details, see “Muting Audio” on page 35.
Simultaneously radio broadcast reception
Set the mute time of the simultaneous broadcast reception.
For more details, see “AF-DUAL Function” for simultaneously monitoring the amateur
frequency while listening to the broadcast radio.
Changing the sound volume setting method
You can set the sound volume adjustment mode to be automatically canceled after
about 3 seconds, after pressing
v
and then adjusting the sound volume with
O
.
Enter the Set mode:
1
Press and hold
M
for over 1 second.
2
Turn
O
to select [2 TX/RX].
3
Press
H
.
䎶䎨䎷䎝䎃䎃䎕䎃 䎷䎻 䎒 䎵䎻
䎃䎃䎃䎃䎃䎃䎃䎃䎖䎃 䎰䎨䎰䎲䎵䎼
䎃䎃䎃䎃䎃䎃䎃䎃䎗䎃 䎶 䎬 䎪䎱䎤䎯 䎬 䎱䎪
䎃䎃䎃䎃䎃䎃䎃䎃䎘䎃 䎶䎦䎤䎱
䎖䎃 䎤 䎸 䎧 䎬 䎲
䎔
䎃
䎰䎲䎧䎨
䎰䎲䎧䎨
䎃 䎕
䎃
䎧 䎬 䎪 䎬 䎷䎤 䎯
䎔䎃 䎰 䎬 䎦䎃䎃䎪 䎤 䎬 䎱
䎕
䎃
䎰䎸䎷䎨
䎃 䎖
䎃
䎵 䎻
䎃
䎤 䎩䎃 䎧䎸䎤䎯
䎧䎸䎤䎯
䎃 䎗䎃
䎗䎃䎃䎹䎲䎯
䎹䎲䎯䎃 䎰䎲䎧䎨
䎃 䎔䎃 䎰 䎬 䎦䎃 䎪 䎤 䎬 䎱
䎃 䎃䎃䎃䎃䎃䎯 䎨 䎹 䎨 䎯䎃 䎘
FT1DR̲DE̲Eng.indb 114
FT1DR̲DE̲Eng.indb 114
13/06/28 15:17
13/06/28 15:17