90
Communicating with a Specific Remote Station
Using the Tone Squelch Function
4
Turn
O
to select [1 BELL].
5
Press
H
.
6
Turn
O
to select [RINGER].
7
Press
H
.
8
Turn
O
to select the number of times the bell rings.
Remark
Default:
Once
Tip
You can select the number of times the bell rings from among 1
to 20 times, or continuous.
9
Press
p
to set the selected number of times the bell rings
and exit from the Set mode.
Calling Only a Specific Station New Pager Function
When using the transceivers with your friends, specifying personal codes (each code
composed of two CTCSS tones) allows you to call only a specific station. Even if the
called person is not near his or her transceiver, the information on the LCD indicates
that he or she has been called.
A
C
B
Mr. C sends the personal
code of Mr. B.
Three persons A, B, and C
are using the transceiver.
Only Mr. B is called.
I’m going
to call
Mr. B.
Ring,
ring,
ring
Flow of Operation to Use the Pager Function
Set the same code as that of the remote station.
Determine a frequency.
Perform transmission/reception.
Confirm reception according to the information
on the LCD and the bell sound.
䎔䎃
䎔䎃䎃 䎥䎨䎯䎯
䎥䎨䎯䎯
䎃䎃䎶䎨䎯䎨䎦䎷䎃䎃
䎶䎨䎯䎨䎦䎷䎃䎃䎃䎝䎃䎃䎥䎨䎯䎯
䎝䎃䎃䎥䎨䎯䎯
䎃䎃䎵 䎬 䎱䎪䎨䎵 䎃 䎝䎃䎃 䎔 䎃䎃䏗 䏌 䏐䏈
䏐䏈
FT1DR̲DE̲Eng.indb 90
FT1DR̲DE̲Eng.indb 90
13/06/28 15:16
13/06/28 15:16
