47
Using the Memory
A Wide Variety of Memory Functions
Assigning a Name to a Memory Channel
Example: Assignment of name [YAESU]
1
Switch to the Memory mode.
2
Recall the memory channel to assign a name.
3
Press and hold
M
for over 1 second to enter the Set
mode.
4
Turn
O
to select [3 MEMORY].
5
Press
H
.
6
Turn
O
to select [3 MEMORY NAME].
7
Press
H
.
The cursor appears on the LCD.
8
Press
9
8 times to select the numeric character [Y].
9
Press
H
to move the cursor to the next character
position.
10
Press
2
5 times to select the numeric character [A].
11
Press
H
to move the cursor to the next character position.
12
Press
3
6 times to select the numeric character [E].
13
Press
H
to move the cursor to the next character position.
14
Press
7
9 times to select the numeric character [S].
15
Press
H
to move the cursor to the next character position.
16
Press
8
6times to select the numeric character [U].
17
Press
p
to save the memory tag to the memory channel and exit the Set mode.
Tips
• To delete a character, press
F
. The character is deleted and the cursor moves to left.
• Pressing
0
while entering alphanumeric characters (A,0) allows you to select 0, (space), –, /, ?,
!, ., : and #
• When entering the same character repeatedly, press
H
to move the cursor.
• When assigning a name to a home channel, recall the target home channel by first executing step 1
(see above).
Displaying Memory Tag
During mono band operation, the tag (name) of the memory channel or home channel
can be displayed using the following procedure:
1
Switch to the Memory mode.
2
Press and hold
A
for over 1 second.
The operating band is displayed in Mono band, and a tag
(name) appears under the frequency.
䎙
䎼䎤䎨䎶䎸
䎼䎤䎨䎶䎸䎃 䎦䎯䎸䎥
䎦䎯䎸䎥
Tag (name) display
FT1DR̲DE̲Eng.indb 47
FT1DR̲DE̲Eng.indb 47
13/06/28 15:16
13/06/28 15:16
