89
Communicating with a Specific Remote Station
Using the Tone Squelch Function
6
Turn
O
to select [SELECT].
7
Press
H
.
8
Turn
O
to select a vibrator operation mode.
Remark
Default:
MODE1
MODE1
The vibrator vibrates continuously.
MODE2
The vibrator operates at long intervals.
MODE3
The vibrator operates at short intervals.
9
Press
p
.
Sets the Vibrator mode and exits from the Set mode.
Notification of a Call from a Remote Station by the Bell
Set the Bell sound and the blinking
b
icon on the LCD, to alert you of a call from a
remote station containing a corresponding CTCSS tone or DCS code.
Enter the Set mode:
1
Press and hold
M
over 1 second.
2
Turn
O
to select [4 SIGNALING].
3
Press
H
.
4
Turn
O
to select [1 BELL].
5
Press
H
.
6
Turn
O
to select [SELECT].
7
Press
H
.
8
Turn
O
to select [BELL].
When the tone squelch or DCS function is turned on, the
b
icon appears.
9
Press
p
to set the bell function and exit Set mode.
Tip
To turn off the bell function, select [OFF] in step 6.
Tips
• To use the bell function, turn on the tone squelch or DCS
function.
• The bell function cannot be used via the repeater.
• The
b
icon appears when the bell function is turned on.
Upon receipt of a signal from a remote station, the
b
icon blinks.
Changing the Number of Times the Bell Rings
Enter the Set mode:
1
Press and hold
M
over 1 second.
2
Turn
O
to select [4 SIGNALING].
3
Press
H
.
䎔䎃
䎔䎃䎃 䎥䎨䎯䎯
䎥䎨䎯䎯
䎃䎃䎶䎨䎯䎨䎦䎷䎃䎃
䎶䎨䎯䎨䎦䎷䎃䎃䎃䎝䎃䎃䎥䎨䎯䎯
䎝䎃䎃䎥䎨䎯䎯
䎃䎃䎵 䎬 䎱䎪䎨䎵 䎃 䎝䎃䎃 䎔 䎃䎃䏗 䏌 䏐䏈
䎔䎃䎃 䎥䎨䎯䎯
䎃䎃䎶䎨䎯䎨䎦䎷䎃䎃䎃䎝䎃䎃䎥䎨䎯䎯
䎃䎃䎵 䎬 䎱䎪䎨䎵 䎃 䎝䎃䎃 䎔 䎃䎃䏗 䏌 䏐䏈
FT1DR̲DE̲Eng.indb 89
FT1DR̲DE̲Eng.indb 89
13/06/28 15:16
13/06/28 15:16
