132
Functions Used
As Needed
Set Mode
7
Turn
O
to enter the first character of the password.
Enter the first character (0-9. A to D,
¼
, and #) of the
password.
8
Press
H
.
The cursor moves to the next character position.
9
Repeat steps 7 and 8 to enter the remaining three
characters.
10
Press
H
.
11
Turn
O
to select [ON].
Remark
Default:
OFF
12
Press
p
to save the password setting, and exit the Set mode.
Tips
• To cancel the password function, execute the above-mentioned steps 1 to 5, select “OFF” with
O
,
and then press
p
over 1 second.
• Keypad keys cannot be used to enter the password.
• When the on-timer function is active, the password function is ineffective.
O
Turning on the transceiver using a password
1
Press and hold
P
for over 1 second.
The password entry screen appears.
2
Enter the password using keypad keys.
Enter the registered 4-character password.
When the valid password is entered, the frequency display screen appears.
Remark
When an invalid password is entered, the transceiver is turned off automatically.
Caution
If you’ve forget the registered password, carrying out all resetting allows you to turn on the transceiver
without entering the password.
It should be noted that performing all resetting resets (initializes) all information such as the
information registered to memory channels and various setting values.
It is recommended that the password be written down on paper.
FT1DR̲DE̲Eng.indb 132
FT1DR̲DE̲Eng.indb 132
13/06/28 15:17
13/06/28 15:17
