135
Functions Used
As Needed
Set Mode
Disabling reception while no signal is received
Reception Save Function
To reduce power consumption, the reception function can be turned off when not
receiving a signal.
Enter the Set mode:
1
Press and hold
M
for over 1 second.
2
Turn
O
to select [8 CONFIG].
3
Press
H
.
4
Turn
O
to select [17 SAVE RX].
5
Press
H
.
6
Turn
O
to select the time.
Select the time for the reception to be turned off
automatically.
0.2 SEC (1:1) to 1.0 SEC (1:5)
(Step: 0.1 sec)
to 1.0 SEC (1:5) to 10 SEC (1:50)
(Step: 0.5 sec)
to 1.0 sec (1:50) to 60 sec (1:300 sec)
step 5 sec
OFF
Remark
Default: 0.2 sec (1:1)
7
Press
p
to save the Reception Save function setting, and exit the Set mode.
Changing the frequency step manually
Frequency step can be set so that it can be changed manually.
For more details, see “Changing the Frequency Step Manually” on page 37.
Setting clock time
Set the time for the internal clock of this transceiver.
For details, see “Setting clock time” on page 34.
Restricting the continuous transmission time
TOT Function
Set the transceiver to automatically return to the receive mode after transmitting
continuously for a certain period of time. Accidental transmission of unnecessary
signals, and unwanted battery power consumption can be prevented (time-out timer
function).
Enter the Set mode:
1
Press and hold
M
for over 1 second.
2
Turn
O
to select [8 CONFIG].
3
Press
H
.
䎔䎚䎃
䎔䎚䎃䎃䎶䎤䎹䎨䎃䎃䎵䎻
䎶䎤䎹䎨䎃䎃䎵䎻
䎔䎛䎃
䎔䎛䎃䎃䎶 䎷 䎨 䎳
䎔䎜
䎔䎜䫹䎧䎤
䎧䎤䎷 䎨䎃䎃 䎉䎃䎃 䎷 䎬 䎰 䎨 䎃䎃䎤䎧䎭
䎤䎧䎭
䎕䎓
䎕䎓䫹䎷䎲䎷
䎷䎲䎷
䎔䎚䎃
䎔䎚䎃䎃䎶䎤䎹䎨䎃䎃䎵䎻
䎶䎤䎹䎨䎃䎃䎵䎻
䎃䎃䎃
䎃䎃䎃 䎃䎃䎃䎓 䎑 䎕 䏖䏈䏆
䏖䏈䏆䎋 䎔 䎝 䎃䎔䎃
䎃䎔䎃䎃 䎃䎌䎃䎌
䎃
䎶䎨䎷䎝䎃
䎶䎨䎷䎝䎃䎃䎛䫹 䎦 䎲䎱 䎩 䎬 䎪
䎃䎃䎃䎃䎃䎃䎃䎃䎜䫹 䎤 䎳 䎵䎶
䎃䎃䎃䎃䎃䎃䫹䎔䎓
䎔䎓䫹 䎶 䎧䎃䎃䎦䎤䎵䎧
䎦䎤䎵䎧
䎃䎃䎃䎃䎃䎃䎔䎔
䎔䎔䫹 䎲䎳 䎷 䎬 䎲䎱
FT1DR̲DE̲Eng.indb 135
FT1DR̲DE̲Eng.indb 135
13/06/28 15:17
13/06/28 15:17
