77
Convenient Functions
Dual Reception (DW) Function
Caution
Be sure to set a memory channel as the Priority Memory Channel for standby before using this
function.
Tips
• The Priority Memory Channel is set to the Memory Channel number 1 by default.
• Pressing and holding
M
over 1 second and changing the Set mode option allows you to use this
function more conveniently.
[5 SCAN] [1 DW TIME]: The interval for monitoring the Priority Memory Channel can be changed.
[5 SCAN] [4 SCAN RESUME]: The resumption conditions for Dual Reception can be changed.
• The combination of the frequency bands and modes of the frequency for the Priority Memory
Channel (standby side) and the frequency for continual signal reception (active side) can be freely
changed.
AF-DUAL Function for simultaneous signal reception over the
other frequency while listening to the radio
The AF-DUAL Reception Function allows reception of a radio broadcast, while standby
reception of A-band or B-band frequency (or frequency registered to a memory channel)
is active. When standby reception is active, voice received over that frequency cannot
be heard, however if a voice signal is detected, the reception of the radio broadcast will
be paused and voice will be heard. Although there is a similar function in Dual Reception
(See page 76), because a signal reception over the frequency registered to the priority
memory channel is checked approximately every 5 seconds in Dual Reception, the
reception for radio broadcast is interrupted every time this happens. With the AF-DUAL
Reception Function, the reception of radio broadcast is interrupted only when there is a
calling signal from another transceiver.
O
Listening Radio Broadcast with AF-DUAL Reception Function
1
Set the A-band or B-band frequency (or Memory Channel/Home Channel) for
standby. Set the standby reception frequency for A-band or B-band (or Memory
Channel/ Home Channel) to monitor for calls while receiving radio broadcast.
Tips
•
You can listen to radio broadcast while scanning the standby signal reception frequencies.
•
Radio broadcast can be listened to while monitoring the standby signal reception frequency
in the dual reception mode.
2
Press
A
to set the operating band to A-band.
3
Press
F
and then
6
to activate the AF-Dual function.
4
Press
B
and select [AM] or [WFM].
The broadcast band is toggled in the following order every
time
B
is pressed:
AM broadcast (middle wave band)
⇔
FM broadcast
⇔
AM
broadcast (middle wave band)
On the LCD, AM (AM broadcast) or WFM (FM broadcast)
is displayed.
5
Turn
O
to tune in to the frequency of broadcast station.
FT1DR̲DE̲Eng.indb 77
FT1DR̲DE̲Eng.indb 77
13/06/28 15:16
13/06/28 15:16
