![background image](http://html1.mh-extra.com/html/lodar/92320/92320_quick-start-manual_1933842001.webp)
w92320.09
20 Function and IP Extend Transmitter
SYSTEM PART NUMBER
92320
1 x 20 Function Receiver & 1 x 10 Function Extend Transmitter
(20 Function in Extend Mode)
REPLACEMENT TRANSMITTER
92310TX - 1
0 Function IP Transmitter with
Extend Buttons.
(20 Function in Extend Mode)
REPLACEMENT RECEIVER
9220RX - 2
0 Function Receiver
TRANSMITTER SPECIFICATION
ENCLOSURE
Material
ABS
Switch Type
Tactile Dome on PCB Keypad
Functions
10 (20 with dual function buttons)
Identification
Pockets for printed text or image insertion
RF
Modulation
2-GFSK. Gaussian Frequency Shift Keying
Frequency
433.050 MHz to 434.790 MHz
Channels
1
Channel Selection
Fixed
Technology
Hand-held Transmitter
Temperature Range
-10
o
C to + 40
o
C (13
o
F to + 104
o
F). Use Lithium for lower temperatures
Range
60m (200ft)
Aerial
Internal
–
printed on PCB
Transmitted power
1mW Typical
POWER
Batteries
4 x AAA Alkaline Manganese in holder (6 Volts)
Quiescent Current
15
µ
A
Current Transmitting
20mA
PROTECTION
IP Rating
65
Registration codes
Over 16 million
INDICATOR
Type
1 x
Red LED
Off
Transmitter is OFF and in standby mode
Slow flash
Transmitter is ON and ready for use (The SET Button has been pressed and released)
On
Transmitting (A STOP, SET or Function Button is being pressed)
Fast flash
Transmitting
–
Indication that the battery will need replacing soon
Enclosure Slow Flash
ON and ready for use with Receiver 2. The SET button has been pressed and released
COMPLIANCE
FCC
FCC CFR 47-part 15.231
433.9MHz
IC
ISED RSS-210 Issue 8
433.9MHz
RoHS
Directive 2011/65/
EU
CONTENTS
1 x
Receiver
1 x
IP Extend Transmitter
1 x
Lanyard
1 x
Instructions