Xtreme XR3034 Скачать руководство пользователя

Страница: 53 / 76

Operation Manual

Operation

Before Starting Forklift

Warning

Failure to use proper safety procedures when mounting

and dismounting the forklift could result in death or serious

injury.

•

Keep steps clear of dirt, mud, snow, ice, debris, and oth-

er hazards.

Face the forklift for mounting or dismount-

ing. Use hand holds and steps to maintain

three (3) points of contact at all times, either

both hands and one foot or both feet and one

hand.

•

DO NOT use the controls, steering wheel, or foot pedals

as hand holds or steps. Avoid accidentally engaging or

disengaging a control.

DO NOT jump from the forklift. Clothing

can get caught on pedals, levers, or other

protruding parts. Landing on uneven surfaces

could result in death or serious personal

injury.

NOTE:

The engine will only start when the travel select lever is

in NEUTRAL (N) and the Parking Brake switch is ON (engaged).

Fig 61. Travel Select Lever

Must Be In Neutral

(N) To Start The Reach Forklift

Fig 62. Parking Brake Switch (A)

Must Be On

(Engaged) To Start The Reach

Forklift. Parking Brake Light Indicator (B) Is Also On.

Master battery disconnect on.

Use safe mounting/dismounting procedures to enter the

operator cab.

Adjust the operator seat for position and comfort. (Refer to

Seat Adjustment section in this manual)

Adjust mirrors (this may require assistance).

Adjust side arm rest.

Fasten seat belt.

Make sure the travel select lever is set to NEUTRAL (N) and

the Parking Brake is ON (engaged).

Содержание XR3034













































































Результаты поиска

Содержание XR3034

Отзывы:

Похожие инструкции для XR3034

Бренды по названию

Популярные бренды

Xtreme XR3034, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR3034

Отзывы:

Похожие инструкции для XR3034

Бренды по названию

Популярные бренды