Xtreme XR3034 Скачать руководство пользователя страница 44

Страница: 44 / 76

Operation Manual

Operator Cab

Boom Control

Fig 45. Boom Control Handle

The boom control handle (Fig. 45) has variable motions from

the center position that control boom and tilt functions. It

is used to raise, lower, extend, retract the boom, and tilt the

carriage (or attachment).
NOTE: The boom control handle is a variable speed control.

Function speed is proportional to handle movement. The

more the handle is moved in the appropriate direction, the

faster the corresponding function will occur.

REGENERATION MENU
Pressing the ENTER button while in GAUGE DISPLAY mode or

pressing the REGEN MENU soft button will bring up a menu

that displays the exhaust system regeneration mode with the

available options. The operator may disable an automatic

regen or force a manual regeneration from this menu (a

manual regen can only be initiated if the system is requesting

it). Pressing the ENTER button will return to the GAUGE

DISPLAY mode.

Fig 43. Regeneration Menu

FAULT CONDITION POP-UPS
A fault condition may trigger a pop-up dialog box describing

the nature of the fault. A soft button may need to be pressed

to acknowledge the fault.

NOTE: Increasing engine speed can increase boom lift and

extend speed.

BACKUP CAMERA (OPTIONAL)
The display will automatically change to the backup cam-

era when the transmission is placed in REVERSE. When the

transmission is in NEUTRAL or FORWARD, the display can be

switched from the GAUGE DISPLAY to the BACKUP CAMERA

by pressing the lower left-hand soft button (above the MENU

button). Pressing the soft button again will return to GAUGE

DISPLAY.

Fig 44. Boom Control Handle

NOTE: Two (2) boom functions can be performed at the same

time by moving the handle into the corner between two (2)

functions. For example, moving the handle to the forward, left

corner will lower and retract the boom at the same time.

Содержание XR3034













































































Результаты поиска

Содержание XR3034

Отзывы:

Xtreme XR3034, Руководство по эксплуатации и безопасности, Страница: 44 / 76

Результаты поиска

Содержание XR3034

Отзывы: