Xtreme XR3034 Скачать руководство пользователя страница 55

Страница: 55 / 76

Operation Manual

Operation

Steering Modes

Forklift Travel

Warning

Never use crab or four wheel (4W) steering for

traveling at high speeds. Use only two wheel

(2W) steering for higher speed travel and

slow the forklift before turning. Rapid turn-

ing using crab, four wheel (4W), or the

optional two wheel rear (2WR) steering could cause tip

over, which could result in death, serious injury, or property

damage.

Check the turning radius around the forklift before making

a turn, especially if using four wheel (4W) steering or

two wheel rear (2WR) steering, which provide a tighter

turning radius. Look over your shoulder in the direction

of the turn when backing. Failure to remain aware of your

turning radius area could result in death, serious injury, or

equipment damage.

Caution

DO NOT change steering modes until the forklift slows or

comes to a complete stop.

The reach forklift includes three STANDARD modes of

steering; Crab, Two Wheel (2W), and Four Wheel (4W) Steering.

Use the Steering Select switch located on the dash panel to

change steering modes.

Crab steering allows all four (4) wheels to turn

in the same direction as the steering wheel,

allowing the forklift to move “sideways”. Crab

steering is useful in a congested work site to

line up to a loading location.

Crab Steering

Two wheel (2W) steering allows the front

wheels to turn in the same direction as the

steering wheel. The rear wheels remain in

a fixed forward position. Two wheel (2W)

steering is useful for traveling at higher

Two Wheel Front Steering (2W)

speeds.

Four wheel (4W) steering allows the front

wheels to turn in the same direction and the

rear wheels to turn in the opposite direction of

the steering wheel. The rear wheels follow the

front wheel path. Four wheel (4W) steering is

Four Wheel Steering (4W)

useful for a short turning radius and in muddy or sandy

conditions.

Fig 66. Maximum Fork Sweep

Warning

Allow for adequate clearance between the

attachment and other objects when turning.

The attachment extends beyond the front of

the forklift. The operator must be aware of

the maximum sweep of any attachment

being used, when turning, to avoid hitting personnel and

other objects in the area to prevent death, serious injury, or

property damage.

Содержание XR3034













































































Результаты поиска

Содержание XR3034

Отзывы:

Похожие инструкции для XR3034

Бренды по названию

Популярные бренды

Xtreme XR3034, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR3034

Отзывы:

Похожие инструкции для XR3034

Бренды по названию

Популярные бренды