Xtreme XR3034 Скачать руководство пользователя страница 6

Страница: 6 / 76

Operation Manual

Safety

Xtreme Manufacturing reserves the right to make technical

changes for product improvement. This manual may contain

illustrations and photographs (for demonstration purposes),

which slightly deviate from the actual product.

Safety information provided in this manual is a basic guide

and an attempt to prevent accidents. Xtreme Manufacturing

cannot anticipate every circumstance that might involve a po-

tential hazard. Warnings in this manual and on the forklift are

NOT all-inclusive.

You are responsible for safe operation of the forklift and all

attachments. You must satisfy yourself that the techniques,

operating procedures, work methods, or tools you use are

safe; especially those not specifically mentioned by Xtreme

Manufacturing.

The safety of everyone around the forklift depends significantly

on your knowledge and understanding of all correct and safe

operating practices and procedures. You can help prevent

accidents by remaining alert and recognizing potentially

hazardous situations.

Follow State and Federal health and safety rules and/or local

regulations for operating and maintaining the forklift.

•

This manual does not replace any laws and regulations.

•

The operator is required to comply with all applicable

laws and regulations.

Danger

Signal Words

Safety Disclaimer

CAUTION (Yellow) with the safety alert sym-

bol indicates a potentially hazardous situa-

tion which, if not avoided, could result in mi-

nor or moderate injury.

Caution

Warning

Safety Symbols

WARNING (Orange) used with the safety alert symbol indi-

cates a potentially hazardous situation which, if not avoid-

ed, could result in death or serious injury.

Warning

CAUTION (Yellow) used without the safety alert symbol

indicates a potentially hazardous situation which, if not

avoided, may result in property damage.

Safety symbols are provided to remind the operator of

hazardous situations. Xtreme Manufacturing provides these

symbols in an attempt to inform all operators, regardless of

reading and language skills, of as many potential hazards as

possible. These symbols cover many, but not all, potential

dangers and hazards associated with operating the forklift.

Make safety a high priority while operating the forklift.

Learn and follow all safety messages in this manual and on

forklift labels to prevent death, serious injury, or equipment

damage. The following two pages include a list of some of

the safety symbols that may be used on this forklift.

Signal words are the word or words that call attention to

the safety sign and designate a degree or level of hazard

seriousness. The signal words used in this manual are DANGER,

WARNING, and CAUTION.

DANGER (Red) used with the safety alert symbol indicates

an imminently hazardous situation which, if not avoided,

will result in death or serious injury.

Содержание XR3034













































































Результаты поиска

Содержание XR3034

Отзывы:

Бренды по названию

Популярные бренды

Xtreme XR3034, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR3034

Отзывы:

Бренды по названию

Популярные бренды