Xtreme XR3034, Руководство по эксплуатации и безопасности

Страница: 69 / 76

Operation Manual 69
Operation
Fig 86. Load Capacity Chart
Using Load Capacity Charts
The reach forklift includes two (2) indicators to assist the
operator for accurately using the load capacity charts. These
indicators are the Boom Extend Letters and the Boom Angle
Indicator.
Boom extend letters are located on the left side of the boom
and visible to the operator as the boom is extended. These
letters indicate boom extension as it corresponds to the load
capacity charts.
Fig 85. Override Button
Load Capacity Charts
Warning
DO NOT exceed rated capacity. Any attempt
to lift or carry loads in excess of those shown
on the load capacity charts could cause fork-
lift tip over, loss of load, or structural damage
which could result in death, serious injury, or
property damage.
All load ratings shown on load capacity charts are based
on the forklift being on firm, level ground, the forks being
evenly positioned on the carriage, the load being centered
on the forks, properly sized tires properly inflated and/
or foam filled, and the forklift being in good operating
condition.
Load capacity charts, located on the left side of the dash
panel, are provided to assist the operator in determining how
to safely operate the boom to pick up, carry, and set down a
load with the reach forklift, including what angle, how high,
and how for to extend the boom.
Fig 84. Frame Level Indicator
Warning
The reach forklift includes a Frame Sway
Override Button. Improper use of the Frame
Sway Override Button could cause death, se-
rious injury, or property damage.
The frame sway feature becomes locked and will not operate
when the boom is raised 100 or more. Applying the service
brake, parking brake, and placing the travel select lever in
NEUTRAL, then pressing the Override Button (on the front
side of the control handle) will override the lockout feature
and allow frame sway.