Xtreme XR3034 Скачать руководство пользователя страница 37

Страница: 37 / 76

Operation Manual

Operator Cab

Seat Belt

Warning

Always check the condition of the seat belt

and mounting hardware before operating the

forklift. If the seat belt or mounting hardware

is defective, it may not properly restrain

the operator, which could result in death or

serious injury.

•

DO NOT operate the forklift until the seat belt or

mounting hardware is replaced, if worn or damaged.

•

The seat belt MUST be worn while operating the forklift.

Failure to wear the seat belt could result in death or

serious injury.

The reach forklift is equipped with a standard two inch (2”)

wide retractable seat belt. A three inch (3”) wide retractable

seat belt is available where required by state and local laws

and regulations.

Fig 23. Retractable Seat Belt

Warning

DO NOT adjust the seat or seat belt while the

forklift is moving. Keep at least one hand

on the wheel while the forklift is moving to

prevent loss of forklift control which could

result in death or serious injury.

Before starting the engine, adjust the seat for position and

comfort (refer to the Operator Seat section of this manual) and

then adjust the seat belt as follows:

Grasp the free end of the seat belt (located on the left side

of the seat) and make sure the belt webbing is not twisted or

entangled in any portion of the seat assembly.

Pull the retractable seat belt across your lap. Position the

seat belt as low on your body as possible.

Insert the latch plate into the buckle (on the right side of

the seat) until a “click” is heard.

Make sure seat belt retracts snugly across your lap.

Rear View Mirrors

Two (2) adjustable rear view mirrors are provided to aid the

operator’s rear vision. One (1) rear view mirror is mounted on

the upper left of the operator’s cab.

Fig 24. Cab-Mounted Mirror

One (1) rear view mirror is mounted on the sway cylinder.

Fig 25. Sway Cylinder Mounted Mirror

Содержание XR3034













































































Результаты поиска

Содержание XR3034

Отзывы:

Бренды по названию

Популярные бренды

Xtreme XR3034, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR3034

Отзывы:

Бренды по названию

Популярные бренды