Xtreme XR3034 Скачать руководство пользователя страница 70

Страница: 70 / 76

Operation Manual

Operation

Fig 87. Boom Extend Letters

The boom angle indicator is located on the left side of the

boom and is visible from the operator’s seat. Use the boom

angle indicator to determine the boom angle when referring

to load capacity charts.

NOTE:

The boom angle indicator is a plumb arrow with

angular graduations from -5 to +570.

Fig 88. Boom Angle Indicator

Reading Load Capacity Charts

To accurately read the load capacity charts, you must

determine three (3) things:

•

Weight of the load being lifted

•

Height of structure where load is to be placed

•

Distance from front tires where load will be placed

28,000 LBS MAX
LOAD WITH BOOM
FULLY RETRACTED
ONLY.

XR3034 LOAD CHART - FORK POSITIONING CARRIAGE

P/N 17095-000

LOAD RATINGS
SHOWN ARE FOR
VEHICLES EQUIPPED
WITH FOAM FILLED
TIRES ONLY.

15,000 LBS AT 24 IN
MIN CAPACITY FORK
(30,000 LBS PAIR).

Fig 89. Load Capacity Chart

For example:

The operator determines load weight and makes sure load

does not exceed fork, attachment, or boom capacity.

The load is 15,000 pounds (6804 kg).

The operator safely moves the load to a loading position.

•

Places forks under load

•

Tilts and raises load safely

•

Fully retracts boom

•

Drives forklift to position perpendicular to structure

•

Levels the forklift

The operator determines height of structure where load is

to be placed.
•

The structure height is 20 feet (6 meters) from ground

level.

The operator determines distance from front tires where

load will be placed.
•

The distance in front of forklift where load will be placed

is 12 feet (3.65 meters).

Operator reads load capacity chart (shown below) for

attachment carriage to learn it will be safe to place the load

at any boom angle with the boom extend letter “C” showing.

NOTE:

For example, when letter “A” first appears, the boom

extension corresponds to the arc of line “A” throughout all the

load capacity charts.

Содержание XR3034













































































Результаты поиска

Содержание XR3034

Отзывы:

Похожие инструкции для XR3034

Бренды по названию

Популярные бренды

Xtreme XR3034, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR3034

Отзывы:

Похожие инструкции для XR3034

Бренды по названию

Популярные бренды