Xtreme XR3034 Скачать руководство пользователя страница 54

Страница: 54 / 76

Operation Manual

Operation

Normal Starting

Starting Forklift

Warning

To prevent death, serious injury, or property

damage, the operator must be seated with

seat belt fastened, arms, legs, and head com-

pletely inside the Rollover Protection Struc-

ture/Falling Object Protection Structure

(ROPS/FOPS), the travel select lever in NEUTRAL, and the

Parking Brake switch ON (engaged) BEFORE starting the

forklift.

Place Key in Ignition Switch.

Fig 63. Turn Key in Ignition Switch to RUN

Turn key in ignition switch clockwise to the START position.

Fig 64. Turn Key in Ignition Switch to START

Caution

Release the key immediately once the motor starts. If the

motor does not start, DO NOT crank the starter motor con-

tinuously for more than 15 seconds. Failure to release the

key after the motor has started or continuous cranking can

damage the starter motor.

Release key immediately after the engine starts. The

Ignition Switch will automatically return to RUN.

Fig 65. Ignition Switch Automatically Returns to RUN

NOTE: If the engine fails to start on the first try, wait until the

engine and starter come to a complete stop before cranking

the engine again.

After the engine starts, allow the engine to idle for

approximately 60 seconds.

Apply the service brake pedal and disengage the Parking

Brake switch.

Turn key in ignition switch clockwise to the RUN position.

NOTE:

Wait for display to boot up and “Engine Wait to Start”

indicator to go out.

NOTE: The Start position is spring-loaded. When the key is

released, the ignition switch will automatically return to the

RUN position.

Содержание XR3034













































































Результаты поиска

Содержание XR3034

Отзывы:

Бренды по названию

Популярные бренды

Xtreme XR3034, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR3034

Отзывы:

Бренды по названию

Популярные бренды