NFP Storage Manager 1.1 User’s Manual
130
Troubleshooting
still checking the file system and booting has not completed yet.
Wait until it finishes instead of improperly shutting down the server
again. Booting is completed when the LED’s on the front panel of the
server is back to normal.
Problems about the Hard Disks on
NP1040
NAS
Server
Hard disk failure
When purchasing models supporting hot-swappable disks, the failure
of any hard disk in the system will be reported on the
NFP Storage
Manager
’s
Server Information
à
Status
page. A notification will be
sent to the system administrator, who will only need to remove the
defective HDD (without having to power down the system), and
replace it with a new one. System will automatically configure the new
hard disk.
A Simple, Span or RAID 0 volume that has no inherent safety
measures, so that if any hard disk is damaged, all data in that volume
will be lost.
In a RAID 1 or RAID 5 system, if any hard disk is damaged, after the
new hard disk is added, the system will automatically rebuild the disk
and all the data on the volume, while client access is not
compromised during the rebuilding phase.
Please note the following:
1.
The replacement disk should be a new and empty disk. Do not
Содержание NASolution NP1040
Страница 1: ......
Страница 32: ...NFP Storage Manager 1 1 User s Manual Chapter 4 Using NFP Storage Manager 1 1 27 ...
Страница 102: ...NFP Storage Manager 1 1 User s Manual Chapter 4 Using NFP Storage Manager 1 1 97 ...
Страница 128: ...NFP Storage Manager 1 1 User s Manual NFP Data Replicator 123 ...