Xstream X-HW13008GENNG, Руководство по эксплуатации

Страница: 11 / 40

11
safety
• Installation of this unit including all electrical connections must comply
with all local, state and national codes. (Standards to be followed
include NFPA No. 70/NEC National Electrical Code.In Canada; Refer
to the CSA C22.1 Canadian Electrical Code Part 1)
• This unit must be connected to a grounded, permanent wiring system;
or an equipment-grounding conductor must be run with the circuit
conductors and connected to the equipment-grounding lead on the
unit.
• Make sure the pressure washer is connected to a properly grounded
source which provides correct voltage and adequate fuse protection.
Disconnect from power source when not in use or when making
repairs.
• Do not attempt to light the pilot manually as the electronic spark
ignition lights the pilot automatically.
• Never operate pressure washer with electrical enclosures open,
removed or damaged.
• Do not touch machine while standing in water or with wet hands.
Never let the electrical supply or any connections lay in the water.
• DO NOT direct spray on or into electrical installations of any kind!
This includes electrical outlets, light bulbs, fuse boxes, transformers,
the unit itself, etc.
• DO NOT allow metal components of the pressure washer to come in
contact with live electrical components.
• Any electrical wiring or repairs performed on this pressure washer
should be done by authorized service personnel in accordance with
local and national electrical codes.
• Before opening any electrical enclosure, always shut off the pressure
washer, relieve pressure and disconnect the pressure washer from
the power source. Allow pressure washer to cool down. Never
assume the pressure washer is safe to work on just because it is not
operating. It could restart at any time!