x-Lab Dot Matrix Printer XDP-321 User's Manual
- 58 -
B.1.6 Delivery Note
Delivery notes here refers to the multi-ply papers (2-ply ~ 7-ply). Its paper size and printable area are
based on the specifications of tractor paper and cut sheet. Moreover, the copy capability and printing
precision are not guaranteed because they are affected by paper thickness and inner paper quality
(such as, thickness). In addition, do not use the paper which is not even to avoid paper dirt or printing
slant.
B.1.7 Postcard
As the specification of standard postcard overruns this printer’s guarantee range, therefore, this
printer does not support standard postcard printing.
B.1.8 Passbook
This printer does not support passbook printing.
B.1.9 Label
This printer does not guarantee the printing with labels.
B.1.10 Recycled Paper
In order to save resource, improve the using rate of resource, we recommend using the recycled paper.
The specification of recycled paper should satisfy the using standard requirement.
Note: 1. Label is not included in the guarantee list, please don’t use it.
2. Problem occurs when using labels, we will not guarantee the device and
performance
Caution: • Envelope refers to single layer envelope. The double layer envelope is not
supported and the envelope should not be with solid edge.
• When the envelope pulp at the top or bottom, please don’t print at that area
within 5mm.
• The sunken place in the bottom of the envelope belongs to the non-printable
area. Please ensure the distance from the bottom sunken line to the printing
area is not less than 5mm.
• Do not use following envelopes:
• Envelopes with contents in it.
• Envelopes with holes and which both sides are coherent in the middle.
• Envelopes which seal lip parts are folded.
• Envelopes which seal lip parts are pulped.
• If you print near the pulped area, even though it belongs to the printable
area, it may also cause paper dirt because of the pulp (especially when the
edge is folded or stuck up).
