x-Lab Dot Matrix Printer XDP-321 User's Manual
- 46 -
○
Bend and curliness (cut sheet, tractor paper)
• The paper can be used when the bend of the whole page is less than 2 mm.
• The bend length starts from the bend point should be within 15mm. But when the bend height
is over 2 mm, paper can not be used.
B.1.4 Tractor Paper
Tractor paper is the continuous paper which has gear holes and the traverse perforations lines.
Refer to the following table for the requirement of tractor paper.
Single-ply paper
White paper
Paper
r
e
p
a
p
R
C
N
r
e
p
a
p
y
l
p
-i
tl
u
M
Width
101.6
~
254
mm
Length
≥
145
mm
Copy capability
(Max.)
4 copies (Or 3 copies), paper weight based on the standard of 40g/ m
2
.
Single-ply paper: 52
~
82
g/m
2
Weight
Multi-ply paper (each sheet): 40
~
64
g/m
2
Single-ply paper
≤
0.39 mm
(Note 1)
Total thickness
Multi-ply paper
≤
0.26 mm
(Note 2)
Paper with the whole page folded can not be used.
The fold of corner
Amend it to less than 2mm
More than 15 mm
Bend
Amend it
to
less
than
2
mm
Less than 15 mm
Whole page bend
Less than 2 mm
Arc
Note: See details in the multi-ply paper (NCR paper) requirement
table.
