xLab XDP-321 Скачать руководство пользователя страница 21

Страница: 21 / 69

x-Lab Dot Matrix Printer XDP-321 User's Manual

- 14 -

Chapter 2 Control Panel

You can use the four buttons on the control panel to operate your printer, such as line feed, load paper,

eject paper or set print speed. The LED indicators on the control panel display the currently selected

print speed.

2.1 LED Indicator

2.2 Key Functions

2.2.1 In the Tractor Paper Mode

TEAR

1. In the offline mode, if the paper is at the print position, press

TEAR

button and the printer feeds paper to

the tear off position.

2. In the offline mode, if the paper is at the tear off position, press

TEAR

button and the printer ejects paper

to the next page or to the printing home position of the current page.

LF/FF

In the offline mode, if the paper is at the print position, press the

LF/FF

button (for less than 0.5 second), the

printer will feed the paper one line based on current line spacing. Alternatively, hold the

LF/FF

button down,

the printer will load tractor paper one page continuously.

LOAD/EJECT

1. When the paper is at the ready position, press

LOAD/EJECT

button, the paper will be fed to the printing

home position automatically.

2. When the paper is at the print position, press

LOAD/EJECT

button in the offline mode, printer will eject

one page when the eject-able length is longer than one page. If the paper eject-able length is less than

one page, the paper will go back to the ready position.

3. When the paper is at the tear-off position, press

LOAD/EJECT

button, printer will eject one page

automatically.

ONLINE

1. If the printer is in the offline mode with paper, press this button to enter

ONLINE

mode, the

ONLINE

LED

is on and the printer is available to print now. Press this button in the online mode, the printer is offline,

ONLINE

LED is off and the printer is unavailable to print.

2. If the paper is at the tear off position in the offline mode, press

ONLINE

button, the printer will go back to

the printing home position of the current page or the next page.

LED

OFF

BLINK

ONLINE (Green)

Offline

Online

Micro-Adjust

POWER (Red)

Turn off

Turn on

Paper out or malfunction occurs

Print Speed 1, 2

Indicate the currently set print speed

Figure 2-1 Control panel

Содержание XDP-321






































































Результаты поиска

Содержание XDP-321

Отзывы:

Похожие инструкции для XDP-321

Бренды по названию

Популярные бренды

xLab XDP-321, Руководство пользователя

Результаты поиска

Содержание XDP-321

Отзывы:

Похожие инструкции для XDP-321

Бренды по названию

Популярные бренды