x-Lab Dot Matrix Printer XDP-321 User's Manual
- 45 -
◆
The combination requirements of multi-ply paper (NCR paper)
We recommend using the NCR paper which the quality is in the first class or above. The low quality
NCR paper will affect the copy effect and the printing life.
The papers which accord with the specification are shown as follows.
Pages
2 plies
3 plies
4 plies
Page 1
40 ~ 64 g/m
2
40 ~ 50 g/m
2
40 g/m
2
Page 2
40 ~ 80 g/m
2
40 ~ 50 g/m
2
40 g/m
2
Page 3
----
40 ~ 80 g/m
2
40 g/m
2
Page 4
----
----
40g/m
2
◆
Binding hole and clipped corner
It doesn’t support the paper with binding holes and clipped corners.
◆
The relative regulations of fold, bend and curliness
According to different storage conditions, paper would easily become fold, bend or curliness
through manually disposal, transport and deposit. Therefore, they would affect paper feeding when
using these papers. Thus, please use them after amending according to the following regulations.
The papers which failed to come up to specifications would affect paper feeding seriously, please
do not use them.
○
Fold (cut sheet, continuous paper)
• Paper with the whole page folded can not be used.
(As the paper strength has been changed even after amending.)
• Please amend the fold of the corner to less than 2 mm.
Strong mucilage
(1mm width)
Paper inserted direction
Note: 1. Do not use the paper with binding holes and clipped corners which are not
included in the guarantee list.
2. When using this kind of paper, the device and capability can not be
guaranteed.
