Xinuo HM-5818 Скачать руководство пользователя | Manualshive

Страница: 3 / 83

background image

ECDIS User Manual

2

Notes:

Before starting the vessel borne navigation equipment, be sure to read following notes
carefully to avoid product failures arising from improper operation:
1. Please don’t place the vessel borne navigation equipment at random without

fastening, in order that the equipment won’t be severely damaged when it falls off
because of tossing or other factors during the navigation.

2. Please don’t use any other power adapter which is not equipped for this product, or

else the vessel borne navigation equipment would fail to work for differences in circuit
design, or its performances would be affected, and the machine would be even
damaged. The voltage of this machine must be AC 220V, and must not go beyond
this range.

3. Please don’t dismantle the vessel borne navigation equipment, or else you will be

unable to enjoy the free warranty services if the vessel borne navigation equipment is
dismantled by yourself instead of a maintenance engineer authorized by our
company.

4. In operating or cleaning the vessel borne navigation equipment, avoid any liquid or

other objects falling off inside the equipment, in order not to cause damages to circuit
or a short circuit.

5. Please don’t place the vessel borne navigation equipment and its accessories in

damp areas or have them directly exposed to sun. The machines shall be operated
under dry conditions.

6. The power supply shall be reliably grounded to avoid static electricity and lightning

strike. If the instrument is not used for the time being, please switch the power supply
off.

7. When the vessel borne navigation equipment fails to position for a long while, please

check if the antenna is properly installed, poorly connected, sheltered or disturbed by
other things around it. GPS antenna is active, so please make sure its cable joints are
intact without short or open circuits before starting the vessel borne navigation
equipment. Then, install the antenna correctly. When the equipment is under
operation, the antenna shall not be pulled out at will, to protect the equipment from
damage.

8. In case of over high external temperature, the vessel borne navigation equipment

would crash. In this case, please shut down it for the time being, and restart it when it
is restored to the normal temperature.

9. When LCD (Liquid Crystal Display) is used, it shall not be directly exposed to the

sunshine, and its angle of elevation may be adjusted anytime for optimal visual
effects.

10. In case of any hardware failure (e.g. burnt out power cord, damaged casing or foreign

bodies falling inside the machine), please power the machine off and contact the
distributor immediately.

11. Our company shall not be liable for any legal and other responsibilities arising from

any marine accidents, financial or profit losses of vessel s equipped with out vessel
borne navigation equipment.

«
1
2
3
4
5
...
»

Содержание HM-5818




















































































Отзывы:

Нет отзывов

Похожие инструкции для HM-5818

Бренд: Nedsoft Страницы: 16

X2 RaceLink Pro

Бренд: Mylaps Страницы: 4

Бренд: Globalsat Страницы: 27

Бренд: UnaBiz Страницы: 29

Бренд: Blue Sky Network Страницы: 21

Бренд: Becker Страницы: 155

Бренд: Recon Dynamics Страницы: 6

Бренд: Transystem Страницы: 28

iSXBlue II GNSS Series

Бренд: Geneq Страницы: 184

Бренд: M-Labs Страницы: 14

Бренд: KTM Power Parts Страницы: 7

Бренд: TomTom Страницы: 11

Бренд: TomTom Страницы: 76

Car Navigation System TomTom Toyota

Бренд: TomTom Страницы: 76

Бренд: Eagle Страницы: 70

Бренд: 911SafeTrack Страницы: 20

Бренд: Fimto Страницы: 16

LMU 2600 Series

Бренд: CalAmp Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды