background image

ECDIS User Manual 

2.5.3 Moving objects ................................................................................... 32 
2.5.4 Correcting the object .......................................................................... 33 
2.5.5 Manually updates ............................................................................... 33 

2.6 Mariners’ feature ............................................................................................. 33 
2.7 Mariners’ Note ................................................................................................ 35 
2.8 Navigation record ........................................................................................... 35 
2.9 AIS Information ............................................................................................... 36 

2.9.1  AIS List ............................................................................................ 37 
2.9.2 Messages ........................................................................................... 37 
2.9.3 AIS Settings ....................................................................................... 37 
2.9.4 AIS navigation parameter settings ...................................................... 38 

2.10 Radar target .................................................................................................. 38 
2.11 ECDIS chart 1 ............................................................................................... 39 
2.12 Settings......................................................................................................... 39 

2.12.1 OwnShip setting ............................................................................... 39 
2.12.2 System Settings ............................................................................... 41 
2.12.3 Chart setting ..................................................................................... 43 
2.12.4 Sensor Settings ................................................................................ 48 
2.12.5 Alarm Settings .................................................................................. 49 
2.12.6 Network Settings .............................................................................. 51 

2. 13 Alarm ........................................................................................................... 51 

2.13.1 Overview .......................................................................................... 51 
2.13.2 Alarm prompts and responses.......................................................... 52 
2.13.3 Alarm Record ................................................................................... 52 

2. 14 LOP positioning ........................................................................................... 53 

2.14.1 Overview .......................................................................................... 53 
2.14.2 How to use ....................................................................................... 54 

2.15 Distance and position calculation ................................................................. 56 

2.15.1 Distance calculation ......................................................................... 56 
2.15.2 Position calculation .......................................................................... 56 

2.16 Standard Legend .......................................................................................... 56 

Chapter 3 ....................................................................................................................... 58 

3.1 Summary ............................................................................................... 59 

3.2 View Chart Information ................................................................................... 59 
3.3 Chart Sequencing ........................................................................................... 59 
3.4 IHO S-63 Data Protection Solution ................................................................. 59 

Содержание HM-5818




















































































Отзывы: