Xinuo HM-5818 Скачать руководство пользователя | Manualshive

Страница: 66 / 83

background image

ECDIS User manual

65



Type (S-63 or S-57)



State (expired, canceled, permitted, remain valid for less than 30 days)



These words are only effective for S-63 electronic chart cells. For S-57 electronic

chart cells, these words won’t exist. There are several states as follows:

1) Expired: A cell permit corresponding to an electronic chart cell has expired and become
unsuitable for navigation. In browsing this electronic chart cell, the system will give a
prompt.
2) Canceled: An electronic chart cell has been canceled, not to be maintained any longer
and become unsuitable for navigation. In browsing this electronic chart cell, the system
will give a prompt.
3) Remain valid for less than 30 days: If the cell permit corresponding to an electronic
chart cell will remain valid for less than 30 days, please promptly renew the license of the
electronic chart. A prompt will be given when this electronic chart cell is browsed.
4) Licensed, for S-63 electronic chart cell with a cell permit that can be valid for over 30
days.

3.9.1 Install Exchange Set

The installation guide is used for installing data packets of electronic charts with S-63
catalog structure specified by IHO. For this catalog structure, please refer to the S-63 data
protection solution. S-63 data packets of electronic charts can be only installed through
the installation guide. Meanwhile, the installation guide is compatible with S-57 data
packets of electronic charts with S-63 catalogue structure.



Click “install exchange set” and open the window for such installation.



Choose the root directory of data packets of electronic charts.



Click “Install” to start the installation. Then, the system will execute following

operations:

«
...
64
65
66
67
68
...
»

Содержание HM-5818




















































































Отзывы:

Нет отзывов

Похожие инструкции для HM-5818

guide+play GPS-810

Бренд: Harman Kardon Страницы: 16

Бренд: Navionics Страницы: 38

Бренд: Roadragon Страницы: 12

Бренд: u-blox Страницы: 187

Бренд: Globalsat Страницы: 17

Бренд: Raymarine Страницы: 108

Бренд: Garmin Страницы: 22

GRN-010-02088-01

Бренд: Garmin Страницы: 58

GPSMAP 87 Series

Бренд: Garmin Страницы: 86

Бренд: Garmin Страницы: 8

Бренд: Canese Страницы: 8

Бренд: YF Страницы: 46

W3G - W3G LCD Color Touch Screen Portable GPS/MP3

Бренд: Nextar Страницы: 22

Бренд: Nextar Страницы: 13

Бренд: Satro Страницы: 19

Бренд: T-Mark Страницы: 13

Бренд: Groupe Страницы: 4

Бренд: Standard Horizon Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды