ECDIS User manual
56
Cancel: Close the position property window, the chart does not plot the intersection icon,
and the positioning line becomes unselected;
Application: The location property window is not closed, and the intersection icon is as
shown in the figure;
9.click
,If during the estimation operation, the plot type changes from EP to DR,
and the plot position is updated as the position to generate a log.
2.15 Distance and position calculation
2.15.1 Distance calculation
The distance and position calculation window is located in the multi-function window, as
shown in the figure
and is not selected at this time to calculate the azimuth
and distance of the two position points. Enter the starting point and ending position, click
the calculation button, the orientation and distance of the constant line RL and the big
circle route GC will be calculated.
2.15.2 Position calculation
As shown in the figure, select
,enter the starting point position,
azimuth and distance, click the calculation button, the position will be calculated according
to the horizontal line and the big circle route.
2.16 Standard Legend
The standard legend information is displayed in the Multi-Window Standard Legend panel,
which indicates information about the current use of the chart. All the legend information is
Содержание HM-5818
Страница 9: ...ECDIS User Manual 8 ...
Страница 10: ...ECDIS User Manual 9 Model 2 ...
Страница 80: ...ECDIS User manual 79 Mounting Dimensions of Display 24inch Counter Mounting Flush Mounting ...