
VCU1287 Characterization Board
www.xilinx.com
90
UG1121 (v1.0) December 11, 2015
Appendix D:
System Controller
FPGA Mezzanine Card (FMC)
The VCU1287 board provides three FPGA mezzanine card (FMC) ANSI/VITA 57.1 expansion
interfaces. All FMC mezzanine cards must host an IIC EEPROM that can be read out through
the FMC menu. A raw hexadecimal display and a formatted version of the FMC EEPROM
data are provided through the FMC menu. The VITA 57.1 standard identifies the data fields
of the intelligent platform management interface (IPMI) specification used for the FMC
EEPROM. The VCU1287 board system controller supports the programmable clock
resources on these FMC modules:
IMPORTANT:
These FMC modules are not included.
• FMC XM101 LVDS QSE card
• FMC XM104 MGT serial connectivity card
• FMC XM105 debug card
• FMC XM107 loopback card
These mezzanine cards can be attached to JA2 (callout 28), J3A (callout 29), or J4A (callout
30) of the VCU1287 expansion ports.
Table D-2
shows the accessible clock resources on
each FMC module.
Table D-2:
FMC Module Clock Resources
Xilinx FMC
Module/Board
Clock Source #1 Clock Source #2
XM101
Si570
SI570
XM104
Si570
Si5638
XM105
Si570
n/a
XM107
Si570
n/a
Send Feedback