VCU1287 Characterization Board
www.xilinx.com
32
UG1121 (v1.0) December 11, 2015
Chapter 3:
Board Component Descriptions
Each MGT Quad and its associated reference clocks (CLK0 and CLK1) are brought out to a
connector pad that interfaces with Samtec BullsEye connectors used with the Samtec
HDR-155805-01-BEYE cable assembly. Contact Samtec, Inc.
[Ref 6]
, for information about
this or other cable assemblies.
Figure 3-12
shows the connector pad (A) and the connector
pinout (B).
The information for each GTY transceiver pin is shown in
Table 3-14
.
X-Ref Target - Figure 3-12
Figure 3-12:
MGT Connector Pad and Pinout
Table 3-14:
GTY Transceiver Pins
U1 FPGA Pin
Net Name
Quad
Connector
Trace Length (mils)
BC46
124_RX0_N
124
J37
3477.529
BC45
124_RX0_P
124
J37
3477.391
BA46
124_RX1_N
124
J37
3067.521
BA45
124_RX1_P
124
J37
3067.805
AW46
124_RX2_N
124
J37
2493.979
AW45
124_RX2_P
124
J37
2494.19
AV44
124_RX3_N
124
J37
3018.544
AV43
124_RX3_P
124
J37
3019.123
BF43
124_TX0_N
124
J37
2556.328
BF42
124_TX0_P
124
J37
2556.96
BD43
124_TX1_N
124
J37
2363.323
BD42
124_TX1_P
124
J37
2362.718
BB43
124_TX2_N
124
J37
3014.59
BB42
124_TX2_P
124
J37
3015.086
AW41
124_TX3_N
124
J37
2748.806
;
Send Feedback