VCU1287 Characterization Board
www.xilinx.com
81
UG1121 (v1.0) December 11, 2015
Appendix D
System Controller
Overview
The Xilinx system controller is an ease-of-use application that runs on a Zynq-7000 AP SoC
at power-up on the VCU1287 board. The system controller command line can be accessed
through a serial communication terminal connection (115200-8-N-1) using the enhanced
communication port of the Silicon Labs USB to Dual UART described in
USB to Dual UART
Bridge
.
The main menu lists the available options:
VCU1287 System Controller v1.0
- Main Menu -
-----------------------------
1. Set Programmable Clocks
2. Get Power System (PMBUS) Voltages
3. Get Power Monitoring Data (INA226)
4. Adjust FPGA Mezzanine Card (FMC) Settings
5. Get GPIO Data
6. Get EEPROM Data
7. Configure UltraScale FPGA
X-Ref Target - Figure D-1
Figure D-1:
Silicon Labs Enhancement COM Port
;
Send Feedback