VCU1287 Characterization Board
www.xilinx.com
7
UG1121 (v1.0) December 11, 2015
Chapter 1:
Introduction
Board Features
The VCU1287 characterization board features are listed here. Detailed information for each
feature is provided in
Chapter 3, Board Component Descriptions
.
• UltraScale XCVU095-FFVB2104E FPGA
• BullsEye cable access to all 32 GTH and 32 GTY transceivers on the UltraScale
XCVU095-FFVB2104E FPGA
• Onboard power supplies for all necessary voltages
• Power connectors for optional use of external power supplies
• Digilent USB JTAG programming port
• System controller (Zynq-7000 AP SoC XC7Z010-CLG225 FPGA)
• Two MGT power modules supporting UltraScale FPGA GTY and GTH transceiver power
requirements
• A fixed 300 MHz 2.5V LVDS oscillator wired to multi-region clock capable (MRCC)
inputs
• Two pairs of differential MRCC inputs with SMA connectors
• SuperClock-2 module supporting programmable clock outputs
• Samtec BullsEye connector pads for the GTY and GTH transceivers and reference clocks
• General purpose DIP switches, LEDs, pushbuttons, and test I/O
• Three VITA 57.1 FPGA mezzanine card (FMC) high pin count (HPC) connectors
• USB-to-UART bridge
• I2C bus
• PMBus connectivity to the boards digital power supplies
• Active cooling for the FPGA
Send Feedback