VCU1287 Characterization Board
www.xilinx.com
20
UG1121 (v1.0) December 11, 2015
Chapter 3:
Board Component Descriptions
The MGT transceiver power rails can also be supplied externally. The external supply
connectors are described in
Table 3-2
.
CAUTION!
The MGT Power Module MUST be removed when providing external power to the MGT
transceiver rails.
Information about the available MGT power modules included with the VCU1287 board
characterization kit is available from the vendor websites
[Ref 5]
.
Active Heat Sink Power Connector
Callout 25,
Figure 2-1
An active heat sink (
Figure 3-5
) is provided for the FPGA. A 12V fan is affixed to the heat
sink and is powered from the 3-pin friction lock header J99 (
Figure 3-6
).
X-Ref Target - Figure 3-5
Figure 3-5:
Active FPGA Heat Sink
;
Send Feedback
