Roborock Customer Service Center - Technical Support
replaced every 3-6 months and 6-12 months respectively.
11. Q: How to remove the strainer for cleaning?
A:
Hold the buckle in the left of the strainer and forcedly rotate to remove
the strainer. Then you can clean the strainer with a vacuum, or put the
dirty side down and flap it gently to remove the dirt.
13. Q: How to clean the omni-directional wheel?
A:
After flipping the machine over, grasp the wheel body and forcedly
pull it up to remove the omni-directional wheel. Then, grasp the
omni-direction wheel support while pinching the wheel body to pull it up
to separate the support from the wheel body. After cleaning, push it
tightly and install in place.
14. Q: What should I do when the main brush is deformed due to
entangled wires?
A:
After removing wires, allow the machine to work for a few times.
Deformed rubber sheet and brush bundle will slowly be restored due to
centrifugal force and generally requires no special treatment. Replace it if
necessary.
38
