Roborock Customer Service Center - Technical Support
ending its work to return to the starting point.
7. Q: Why is the machine automatically powered off?
A:
The machine will automatically enter the sleep mode with low power
consumption when the machine is in standby, pause and error mode and
left inactive for 10 minutes. The ring light of the machine body flashes
every 8 seconds. The machine will automatically power off after 12 hours
or more in sleep mode. In addition, it will automatically power off if the
battery has too low capacity.
8. Q: Can timer cleaning be enabled after the machine is powered off?
A:
The timer cleaning will not be effective any longer after the machine is
powered off until you press and hold the ON/OFF key to power it on or
place the machine onto the dock charger to automatically power it on.
9. Q: Can the machine memorize a map and how to clear the memory?
A:
In a cleaning process, the machine will memorize a map, and return to
the dock charger if the battery capacity is low and then continue working
after charging. The map will be cleared at the end of cleaning, without the
need of manual intervention.
10. Q: What should I do when I do not want to continue cleaning or I
would like to restart cleaning?
A:
Follow the operations below to end and restart cleaning: 1. pick the
machine up and put it onto the dock charger, and start cleaning after you
are alerted with the message that the machine is charging. 2. press the
Recharge key to return the machine to the dock charger, and start cleaning
after you are alerted with the message that the machine is charging. 3.
press and hold the Clean key to power the machine off and start cleaning
after the machine is powered on again. 4. press the Spot Clean key to
enable spot cleaning and pause it, and then start cleaning by press the
Clean key.
25
