
14
Charging cautions
Charging requirements
◆
Electrical sparks may be generated in
some charging modules. To avoid
accidents, please do not charge in the
gas station or the place with flammable
gas or liquid.
◆
The charging time can be affected
by the external temperature, which will
be prolonged at low temperature.
◆
The fluctuation range of 220V AC
voltage is ± 10%.
◆
Charge the vehicle with AC full
charge at least once every half month
until the charge current reaches zero,
so that the BMS can correct the SOC of
the battery pack in real time.
Warning
◆
Before charging, it is necessary to
check the status of the vehicle charg-
ing interface and charging equipment.
◆
When charging, the charging gun is
firstly connected to the European
standard charging socket on the front
bumper and then connected to the
220V AC power supply.
◆
Do not start the vehicle during charg-
ing.
◆
After charging, first disconnect the
European standard charging socket on
the front bumper, then disconnect the
220V AC power supply, and finally
cover the charging port.
◆
It is forbidden to touch the vehicle
and power supply equipment during
charging.
◆
It can also be charged in rainy days,
but pay attention to rain protection
during the insertion and removal of the
charging gun. In case of extreme
weather such as thunderstorm, it is rec-
ommended to stop charging.
Impact of charging on special
population
area. Users with implantable
pacemakers and cardiovascular
defibrillators should stay away from
charging vehicles.
◆
Electromagnetic interference may af-
fect the efficiency of medical
electronic devices, thus leading to
injury or death of people with
◆
During charging, electromagnetic
interference may occur in the operating
implantable pacemakers and
cardiovascular defibrillators.
◆
When the vehicle is not charged, it is
no problem for the special population to
ride and drive the vehicle.
or
death
for
people
carrying
implantable
pacemakers
and
implantable
cardiovascular
defibrillators.
◆
当车辆不进行充电作业时,特殊人群
可以放心地乘坐、驾驶车辆。
Charging
充电装置
Our vehicles need three wires L, N, and
PE when being charged. If there is no
ground wire, our vehicle will not be able
to be charged, because if there is no
ground wire, the charging signal voltage
will not be able to exchange signals
with the charger for confirmation.
Содержание Y0210
