Xerox WorkCentre Pro 423, Руководство по обслуживанию

Страница: 426 / 619

03/02 Contents
WorkCentre Pro 423/428 6-9 CHAPTER 6 GENERAL
Item Description
Command to relay
broadcast sending Choose destinations by using the group designations, or
memory dial, which is programmed in the broadcast station.
Sender’s
Information
•
Max: 50 users can be registered. Registration deletion can
be done by “Fax sending tab”
Sender’s name 14 characters (28 byte)
Sender’s department, address 20 characters (40 byte)
Sender’s telephone No. 15 characters (30 byte)
Sender’s fax No. 15 characters (30 byte)
•
When transmission sheet is chosen, sender’s information
that is registered on the above will be reflected to the
transmission sheet.
Sender record Possible to set to print sender record whether it is programmed
in WCP423/428 or not.
Transmission
Sheet
•
Possible to input a destination’s name, a title, a comment,
No. of pages and an attention
•
Possible to select whether the same transmission sheet or
individual transmission sheet is attached to each broadcast
Magnification
•
Zoom (Variable R/E): 50 to 400% (1% increment)
•
Auto R/E
Other functions 2/4/8-up, Form overlay etc
SW alliance CenterWare: Document Monitor
Report Non-transmission report, Broadcast report, Relay broadcast
report
Extension/Outside
line port Available when the extension/outside line changeover kit is
installed
List of address
•
Able to program a list of addresses on a PC. Possible to
connect with other PC because of a separate file.
•
Max: 9999 cases can be input
•
Writing/reading to CSV file is possible
It allows the import of the speed dial number, programmed into
the WCP423/428 main unit, into a list of addresses via EP-
TRESS, or to store registration data in list of address into CSV
Mail notification Notify the result of registered addresses by mail
6.1.6 Printer feature
Item Description
Printing method Laser Xerography
Warm-up time within 48sec (full configuration, factory default 20
°
C)
Printing speed
(supplied from
standard tray) DC235:23ppm(A4LEF), 12ppm(B4), 11ppm(A3)
DC285:28ppm(A4LEF), 15.5ppm(B4), 15.5ppm(A3)
Resolution 23.6dot/mm (600dpi)
Smoothing function (equivalent to 2400dpi)
Paper size Tray1: A5 LEF, B5 LEF, A4 LEF, Letter LEF, Postcard LEF, Envelope
(Long type3 LEF)
Tray2-4: B5, A4, B4, A3, Letter, Legal (13", 14"), 11”x17”
MSI: Max.11”x17”, Min. Postcard (B6, only LEF)
Paper supply (using
80gsm paper) Tray3/Tray4 (option), MSI(M-DD standard)
1,500sheets(500x3)/2,000sheets(500x4)(option),100sheets
(MSI:standard)
Max. paper supply
(using FXA 80gsm
paper) 2,100sheets
Paper output Standard: 500sheets
Option: Side tray: 200sheets
: Staple Finisher:50200sheets
Duplex printing (option)
Capacity of memory Standard: 32MB (Upgradable up to 96MB)
Option: additional SDRAM module (64MB)
Fonts
PCL6
PostScript Fonts
(option)
81 Roman Outline Fonts
136 Roman Fonts
PDL Standard : PCL6
Option: PostScript3
Emulation TIFF image Print
Interface Standard: Ethernet (100Base-TX/10Base-T), Two-way Parallel
(IEEE1284), USB*
1
Option: TokenRinG*
2
Protocol Centro: Compatible, Nibble, ECP
Ethernet: TCP/IP, NetWare, EtherTalk, SMB, DHCP, IPP, HTTP
OS Windows95/98/Me, Windows 2000, Windows NT4.0, MacOS (only for
PostScript)
*1 Only for Windows2000
*2 Ethernet doesn’t operate when connected to TokenRing.