Xerox WorkCentre Pro 423, Руководство по обслуживанию

Страница: 232 / 619

WorkCentre Pro 423/428 2-200 CHAPTER 2 TROUBLESHOOTING
03/02 How to use the Diagnostic C/E Mode
Chain Function Item Description Default Description Access by
58 162 File threshold to boot jobs (activating the
memory send, receive boot or electronic
sorting) 1 to 400files(w/o HDD) 1 to
1000files(with HDD) 400(1000)-N
files accepted) 23 Checks the number of files left, apart from checking the remaining
memory capacity available when activating the memory send, receive
boot or electronic sorting. This data specifies the appropriate file
available for booting each job. CE
58 163 Handling of documents when Stop button
is pressed during printing 0:Delete 1:Store 01 Determines whether the processing of image data will be deleted or
stored when the operator press the Stop button while printing. CE
58 164 Recognizing received document size as
Letter/Legal/Ledger 0=Recognize none
1=Recognize Letter
2=Recognize Legal
3=Recognize Letter/Legal 00 Even when Letter or Legal paper is loaded on the tray, Letter-size or
Legal-size fax can usually not be received.
•
Letter-size or Legal-size fax can be received even when the remote
terminal is of a different manufacturer (ITU-T G3 fax).
•
Letter-size or Legal-size can be sent if the remote terminal supports
the sizes.
CE
58 165 Number of backup files (received files) 0 to 200 50
58 166 Header Printed for G4 receive (CIL) 0:No Header printed 1:Header
printer 00 Determines which clock should be used to print the time of
communication onto the receive header, the clock of the sending
terminal or of the receiving terminal. The parameter specifies “0” for
using the receiving terminal, and “1” for using the clock sent by the
remote terminal. It is necessary to set up 1 (Header to be printed) for
Chain=058 and Function=167. CE
58 167 Header Print capability for G4 receive 0:Off 1:On 00 In the G4 receive operation, this data determines whether or not to print
the Receive Header of Main unit at the lead edge of the receive data.
When the sending terminal prints the send header name at the lead
edge of image data, the receive header overwrites the send header
name. The data will be printed as described in Chain=058 and
Function=166(G4 Header Print). CE
58 168 Selection of smoothing mode for reduction
or enlargement at receive printing XXX00:Thinning out
XXX01:Between dots and lines
XXX10:Storing fine lines
XX0XX:Old smoothing
XX1XX:Smoothing with TIS
01XXX:TIS weak 10XXX:TIS on
11XXX:TIS strong 21(15) Specifies the rreduction method of data received when the document is
longer than the standard size and Auto Reduced is selected as
described in Chain=058 and Functin=101 (100% or auto reduced for the
data received). CE
58 170 Printing stored data 0:Off 1:On 01 When a problem occurs, such as consumables or an appropriate size of
paper out of stock, or paper jammed, Main unit is capable of storing the
data and printing them when a problem is cleared. This data selects
whether or not to enable that feature. CE
58 172 Data pattern to replace in case of decode
error during printing 0:White line 1:Front line 01 Specifies how to inform irreproducible line data received to the receiver.
“White line” may look the received data nice, but the data may appear
unclear depending on the error area and cause misreading. (eg. “8” can
be read as “0”) Be careful when changing data. CE