Xerox WorkCentre Pro 423, Руководство по обслуживанию

Страница: 230 / 619

WorkCentre Pro 423/428 2-198 CHAPTER 2 TROUBLESHOOTING
03/02 How to use the Diagnostic C/E Mode
Fax Feature Setup List (Image process/Send operation) When there are two defaults (ex. 10(0A)), the value outside the parentheses is decimal and that inside is hexadecimal.
Chain Function Item Description Default Description Access by
58 2 Maximum length of long original 0:600mm 1:3600mm 00 Specifies handling of the long original by using DADF. When 3600mm is
selected, original of that length can be transmitted but jammed paper
cannot be detected in case the original is slipped on the way. User
58 3 Send local terminal ID(LOCAL I.D) 0:Off 1:On 01 Determines whether or not to send the local terminal ID code to the
remote terminal. User
58 28 Printing receive at relay station 0 to 999 0000 Specifies the number that enables printing at relay station in the DTMF
relay broadcast operation User
58 51 Default coding for storing originals
(.cf.No.92)(for debug) 1:MH 2:MR 3:MMR 4(out of
use):Image 5:JBIG-BASIC 6:JBIG-
OPTION 05 Determines a coding method at storing originals. Do not change data
unless otherwise instructed.
Individually reflectable on each speed dial (see page 2-207) CE
58 52 Selecting Metric (mm) or Imperial (inch)
when scanning originals 0:Metric at scanning 1:Inch at
scanning 2:Inch at super fine
resolution and Metric for others 02 By enabling this feature, subtle deterioration of images can be
generated. Do not change data unless otherwise instructed. CE
58 53 Send Header Name Print in the Polled
mode (except forced poll) 1:Yes 0:No 01 Determines whether or not to add the Send Header name to the polled
original. CE
58 62 Page division threshold at transmission
(At declaration of cut paper on remote
terminal) 0 0(0)mm to 255(FF)mm
(1step=1mm) 16 This data is used to set a page division threshold when cut paper is
declared by a DIS signal as available recording paper. CE
58 63 Remaining memory capacity available for
storage transmission. Threshold to start
reading the next page in real-time
transmission. 0 to 100%(64) (1step=1%) 00 Specifies the memory capacity available for the memory send operation.
As the data is increased, memory overflow for the original may occur on
one hand, but memory capacity for receive operation can be secured on
the other. CE
58 64 Memory threshold for shifting to real time
send 0 to 99% (1step=1%) 99%=Real
time transmission 20 As the remaining memory capacity is being used up during storing of
memory, Main unit moves to the real time transmission which enables
send operation while storing original. This data specifies the memory
threshold when the send operation is moved to the realtime
transmission. CE
58 65 FAX Photo mode 0:Difference diffused 1:Dither 00 Specifies the halftone type for storing original in the photo mode. CE
58 70 Counting transmission error pages as
transmitted ones 0:Error page not to be counted
1:Error page to be counted
Note: The above selection is
possible only if system data
LOG_SENT_ PAGE is 1. 01 Specifies how to handle Activity Report for the pages that received RTN
signals. “Error page to be counted” means that the RTN signals should
be handled as the MCF signal. CE
58 101 Selecting 100% or auto reduced on
receiving data 0:100% 1:Auto reduced 01 When the length of the data received is between the standard length of
receive width and the page margin as set up at Chain=058 and
Function=102 (Page margin at outputting prints) with “Auto reduced”
selected, the machine automatically reduce the data received to be
within the standard length. When 100% magnification is selected, the
machine prints data in 100% magnification but data may be lost by page
margin feature enabled. User