Xerox WorkCentre Pro 423, Руководство по обслуживанию

Страница: 235 / 619

03/02 How to use the Diagnostic C/E Mode
WorkCentre Pro 423/428 2-203 CHAPTER 2 TROUBLESHOOTING
Chain Function Item Description Default Description Access by
58 370 Selecting Append Data for event tracing 0X00:Event code only 0X01:Event
code and *prm
00
58 371 Controlling trace buffer overwrite 0X00:overwrite 0X01:until full 00
58 372 Selecting trace mode from procedure
trace, interface trace, auxiliary information
trace, and event trace bit0: procedure trace bit1:
interface trace bit2: auxiliary
information trace bit3:event trace
0X00 to 0X0F 05
58 501 Time display 0: 12 hr display 1:24 hr display 00 Determines 12 hour or 24 hour for displaying the time stored User
58 502 Display order of Year, Month, Date, Hour,
and Minute 0:YY_MM_DD 1:MM_DD_YY
2:DD_MM_YY 00 Selects Japanese, American, or British method for the order of printing
date on Reports or Lists. User
58 503 Time indication (hour) 0 to 0X23(0 to 23 hour) 21 Specifies how “Hour” should be indicated for a delayed send operation
when it is initially set up on the Control Panel. User
58 504 Time indication (min) 0 to 0X59(0 to 59 min) 00 Specifies how “Minute” should be indicated for a delayed send operation
when it is initially set up on the Control Panel. User
58 505 Switching display and language to print 0: 1 letter 2 byte 1:1 letter 1 byte 00 To be able to switch the language on display or printed when we support
the second language in the future. User
58 510 Combined send capability 0:Off 1:On 01 Determines whether or not to have the combined send feature
functioned (When a job to the same address is waiting for transmission,
send the job combined with the current send job handling it as the
subsequent page)
A delayed job with the time specified, a job waiting for redialing, of the
broadcast/relay broadcast selected, of mail Box, of Relay Send, of
Immediate send, Memory capacity insufficient, Speed dial used with the
keypad, or of the different department number (Operator Card
management Kit installed) is not applicable to this feature.
Jobs sent combined will be separately printed on the Activity report as
an individual job (the time sent will be administered at the end of each
page) User
58 511 Relay broadcast selection capability 0:Off 1:On 01 Determines whether or not to have the Relay broadcast selection
capability functioned. User
58 512 Mail Box selection capability 0:Off 1:On 01 Determines whether or not to have the Mail Box selection capability
functioned.
58 513 Remote service. Receiving service from
TRESS master through line 0:Disabled 1:Enabled 01 This data is used to enable or disable the remote service capability. If
"Disable" is selected, EP-TRESS releases the line when a reception
response signal is detected. CE
58 551 Manual receive button during
communication 0:Manual receive 1:Manual poll 00 Determines that the Manual Receive button in the Telephone mode
should be functioned as Manual Receive or Manual Poll CE
58 552 Timer value for auto start when
abbreviated dialling or quick dialling
(including group or wild card " * ") is
specified 0 to 59 sec. 06