11
Bi-Directional Communications
1.
Select the down arrow on the screen to see this setting.
2.
On the Parallel Port selections menu, press the selection line labeled
Bi-directional
communications
.
3.
Press the
Change Settings
button.
4.
On the settings screen, note which of the two buttons is highlighted as the current setting for Bi-
Directional Communications. The available settings are Enabled or Disabled. To support high speed,
bi-directional parallel communications, select the Enabled setting.
5.
To change settings, press your setting of choice, then click the
Save
button on the touch screen.
6.
To exit the screen, without making any changes, click the
Cancel
button on the touch screen.
Input to Prime
1.
Select the down arrow on the screen to see this selection.
2.
On the Parallel Port selections menu, press the selection line labeled
Input Prime
.
3.
On the settings screen, note which of the two buttons is highlighted as the current setting for Parallel
Input to Prime. The available settings are Enabled or Disabled. In support of bi-directional
communications, input to prime enables or disables the communication of a control signal over the
parallel port (which is client (workstation) dependent). When in doubt, select the Enabled setting.
4.
To change settings, press the setting of choice, then click the
Save
button on the touch screen.
5.
To exit the screen, without making any changes, click the
Cancel
button on the touch screen.
Содержание WorkCentre 7335
Страница 1: ...System Administrator s Guide 701P47693 WorkCentre 7328 7335 7345...
Страница 12: ...x...
Страница 259: ...247 Receive E mail E mail Notification Service Internet Services FTP Client IPP UPnP Discovery WebDAV Bonjour WSD SOAP...
Страница 300: ...701P47693...
