138
Enabling Ports and Setting TCP/IP
To use Scan to PC (FTP/SMB) you need to enable the applicable Ports (SMB or FTP client) on the Device,
and make sure that an IP address has been set on the machine.
Note: The configuration can also be performed using CentreWare Internet Services.
For information on how to use CentreWare Internet Services, refer to the Internet Services section of
this guide.
1.
Display the System Administrator Menu screen.
a.
Press the
Log In/Out
button.
b.
Enter the user ID with the numeric keypad or the keyboard displayed on screen, and select
Enter
.
Note: The default user ID is “11111”. When using the Authentication feature, a password is required.
The default password is “x-admin”.
c.
Press the
Machine Status button
on the Control Panel.
d.
Touch the
Tools tab
.
2.
When using the SMB protocol, enable the SMB port.
a.
Select
Connectivity & Network Setup
.
b.
Select
Port Settings
.
c.
Select
SMB
and then select
Change Settings
.
d.
Select
Port Status
and then select
Change Settings
.
e.
Select
Enabled
then select
Save
.
f.
Select
Close
until the Port Settings screen is displayed.
Содержание WorkCentre 7335
Страница 1: ...System Administrator s Guide 701P47693 WorkCentre 7328 7335 7345...
Страница 12: ...x...
Страница 259: ...247 Receive E mail E mail Notification Service Internet Services FTP Client IPP UPnP Discovery WebDAV Bonjour WSD SOAP...
Страница 300: ...701P47693...
