10
PJL (Printer Job Language)Setting
1.
On the Parallel Port selections menu, press the selection line labeled
PJL
.
2.
Press the
Change Settings
button.
3.
On the settings screen, note which of the two buttons is highlighted as the current setting for Job
Control Language. This is the setting that enables the Controller's job processing parameters to be
modified by HP PJL. The available settings are Enabled or Disabled.
4.
To change settings, press your setting of choice, then click the
Save
button on the touch screen.
5.
To exit the screen, without making any changes, click the
Cancel
button on the touch screen.
Auto Eject time (Parallel Port Timeout)
1.
On the Parallel Port selections menu, press the selection line labeled
Auto Eject Time
.
2.
Press the
Change Settings
button.
3.
On the settings screen, note the current display in seconds for the Parallel Port Timeout. This is the
length of time that the Controller will wait for an end of job command before printing the current job. Up
and down selection arrows are provided for modification of the timeout value in the increments shown.
4.
To change settings, use the up or down selection arrow, then click the
Save
button on the touch
screen.
5.
To exit the screen, without making any changes, click the
Cancel
button on the touch screen.
Содержание WorkCentre 7335
Страница 1: ...System Administrator s Guide 701P47693 WorkCentre 7328 7335 7345...
Страница 12: ...x...
Страница 259: ...247 Receive E mail E mail Notification Service Internet Services FTP Client IPP UPnP Discovery WebDAV Bonjour WSD SOAP...
Страница 300: ...701P47693...
